|
| The Dutch in ATLAS | | The representatives of Veerman Beheer company, the new client of ATLAS GROUP from the Netherlands, visited our plants. The visitors tested our cementitious products as well as gypsum ones. |
| ATLAS purchased the plant in Grodno (Belarus). | | ATLAS purchased majority stake of private enterprise Tajfun- the major manufacturer at the building sector in Belarus. Thanks to that investment ATLAS has strengthen its position in the Eastern market. ATLAS and Tajfun shall invest ca. 4 million USD for the modernization and manufacture development, within the next two years. |
| Atlas sells again in Dubna- Moscow Region | | Atlas Group reopens Sales Office in Dubna, in the 15th of September. Thus, after three years break, the direct sales of Atlas products in Russia has been reactivated. |
| The quality and environmental protection in one system together | | We have received the approval that Atlas company has implemented and respect an integrated system of the quality and environment management conforming with DIN-EN ISO 9001:2000 and DIN-EN ISO 14001:2005. The certificates were issued of July 2, 2008. We are one of the few companies in branch, possessing an integrated system of management. |
| Atlas is getting dressed the Lithuanians | | 'The best cloth for home' that is the slogan of the year for Atlas insulating system promotional campaign in Lithuania |
|
|
|
|
|
| Materials for Fixing Ceramic and Stone Tiles |
|
AVAL EXTRA GROUT Grout CG2 ArW type
for terraces, facades, underfloor heating, plasterboards;
for glazed tiles. terracote, gres, cement and stone tiles
Properties
flexible, abrasive-resistant, coloured;
low absorption of water, for thin joints
Main parameters
consumption: 1 kg/1m2 of 3mm width joints for 15cmx15cm tiles
width of joint: 1-6 mm |
|
|
|
|
|
|
AVAL KM 117 Flexible adhesive for tiling
on balconies, terraces, façades and on wall or floor heating systems,
glazed tiles, terracotta, clinker, gres tiles, china mosaic), cement and terrazzo tiles,
and non-absorbent natural stone and stone agglomerate tiles
Properties
flexible, tiling from top of the wall,
prolonged open time
Main characteristic
consumption:1.5 kg of the adhesive is used for 1 m2 for each 1 mm of the adhesive layer
layer thickness: 2-5 mm
Tensile adhesion: C1TE type, ≥ 0.5 N/mm2 |
|
|
|
|
|
|
AVAL KM 9 Adhesive for internal use - C1T type
for tiling in typical situations
on plasters, walls, cement and anhydrite floors
used for glazed tiles, terracotta, cement and stone tiles
Properties
possibility of tiling from top of the wall
Main characteristic
consumption: 1.5 kg/1 m²/ 1 mm bed thickness
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm |
|
|
|
|
|
|
AVAL KM 11 Adhesive for tiles - C1TE type
for fixing tiles in typical situations
for glazed tiles, terracotta, cement and stone tiles
suitable for plasters, walls, cement and anhydrite floors
Properties
possibility of fixing from top of the wall and prolonged open time
Main characteristic
coverage: 1.5 kg/1 m²/1 mm of bed thickness
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm |
|
|
|
|
|
|
AVAL KM 14 Fastbonding adhesive - C1FTE type
allows light foot traffic on tiles and grouting in 4 hours after fixing
applied in rooms that have to be continuously used
for plasters, walls, cement and anhydrite floors
used for glazed tiles, terracotta, cement and stone tiles
Properties
possibility of fixing from top of the wall and prolonged open time
Main parameters
consumption: 1 kg/1 m²/ 1 mm bed thickness
adhesion: min. 0.5 N/mm²
bed thickness: 2 - 5 mm |
|
|
|
|
|
|
AVAL KM 17 Flexible adhesive for tiles - C2TE type
is suitable for terraces, facades, underfloor heating, plasterboards,
on difficult substrates: terracotta, old glazed tiles, OSB, cement and stone tiles,
on plasters, walls, cement or anhydrite floors
Properties
flexible with increased adhesion
possibility of fixing tiles from top of the wall and prolonged open time
Main characteristic
consumption: on average 1.5 kg per 1 m2 at 1 mm bed thickness
adhesion min. 1.0 N/mm2]
bed thickeness : from 2 mm to 5 mm |
|
|
|
|
|
|
AVAL KM 15 White adhesive of high flexibility -C2TE type
for fixing tiles of high absorption
on plasters, walls, cement and anhydrite screeds
for home water-pools, shower cabins,
balconies, terraces, facades, fire-places,
underfloor and wall heating
Properties
high elasticity, increased adhesion to substrate,
for `difficult` substrates
Main characteristic
consumption: 1.5 kg/1 m2 with 1 mm bed thickness
bed thickness : from 2 to 5 mm
bond strength : min. 1.0 N/mm2 |
|
|
|
|
|
|
AVAL KM 24 Flexible adhesive for polished gres floor tiles - C2E type
for terraces, undrfloor heating, wooden floors,
for large-size tiles of polished gres
Properties
white, flexible, pourable, thick-layered,
for fixing tiles and adjusting uneven surface; prolonged open time
Main charakteristic
consumption: 1.5 kg/1m2/1mm
layer thickness: 4-20 mm
bonding strength : min. 1.0 N/mm2 |
|
|
|
|
|
|
|
|
