piksel
Helpline
ATLAS CERPLAST

ATLAS CERPLAST

priming mass for renders

ATLAS CERPLAST
P1  na ściany P1 na ściany
P3  do wewnątrz P3 do wewnątrz
P4  na zewnątrz P4 na zewnątrz
N7  pędzel N7 pędzel
N9  wałek N9 wałek
N13  agregat do ścian N13 agregat do ścian

Product description

Primes substrates for ATLAS thin-coat renders – mineral, acrylic and mosaic DEKO M.
Increases adhesion – strongly adheres to the substrate and the applied renders.
Limits the absorbability of the substrate – prevents excessive transfer of water from the freshly applied renders into the substrate.

Main properties

  • ensures ideal adhesion of the render
  • reduces absorbability and strengthens the substrate
  • facilitates render application and texture forming
  • unifies the substrate colour
  • available in several colours

Main parameters

  • consumption: ca. 0,3 kg / m²
  • adhesion: > 1.0 MPa
  • drying time: 4 ÷ 6 h

USE

Go top

Primes substrates for ATLAS thin-coat renders – mineral, acrylic and mosaic DEKO M.

Increases adhesion – strongly adheres to the substrate and the applied renders.

Limits the absorbability of the substrate – prevents excessive transfer of water from the freshly applied renders into the substrate.

Facilitates the execution of the next layer – the rough surfaces reduces “slip” of the applied render.

Creates temporary protective layer for the façade – protects the bare facade against weather conditions for half a year.

Types of substrates – concrete, traditional plasters on walls of bricks, blocks, or ceramic, cellular concrete or silicate hollow bricks, plasterboards, thermal insulation systems with EPS, XPS and mineral wool.


PROPERTIES

Go top

Contains aggregate – increases the adhesion owing to significant development of the effective surface between the layers (creates rough surface).

Protects the substrate against adverse effects caused by the new layer – constitutes a chemical barrier between the substrate and the render, limiting their interaction – limits colour penetration from the substrate and occurrence of stains on the surface of the render.

High adhesion – min. 1.0 MPa to concrete.

White priming agent – additionally available in three colours (clinker, brown, graphite) as a priming mass for ATLAS DEKO M mosaic renders and other colourful thin - coat renders.

CERPLAST colour

(available in 15 kg and

25 kg packages only)
Number of DEKO M render
Brown
120, 221, 316, 512, 513, 514 and 516
Clinker
121, 220, 319, 320, 416, 417, 418 and 517
Graphite
122, 219, 314, 315, 419, 420, 518, 519 and 522

TECHNICAL DATA

Go top

ATLAS CERPLAST is manufactured on the basis of acrylic resin and quartz powder.

Density of the ready-to-use product
ca. 1.5 g/cm³
Adhesion to concrete
> 1.0 MPa
Mass preparation temperature,

substrate and ambient temperature during work

from +5°C to +30°C
Drying time
4 ÷ 6 h

TECHNICAL REQUIREMENTS

Go top

ATLAS CERPLAST is included in the following external thermal insulation systems:

System name
Technical Approval No.
Certificate No.
ATLAS
ETA 06/0081
EC No. 1488-CPD-0021
ATLAS XPS
ETA 07/0316
EC No. 1488-CPD-0075
ATLAS ROKER
ETA 06/0173
EC No. 1488-CPD-0036
ATLAS RENOTER
AT-15-8477/2010
FPC - ITB-0456/Z
ATLAS ETICS
AT-15-9090/2014
FPC - ITB-0562/Z
ATLAS ROKER
AT-15-2930/2012
FPC - ITB-0436/Z
ATLAS ROKER G
AT-15-7314/2011
FPC - ITB-0222/Z

The mass has been given the Hygiene Certificate by the National Institute of Hygiene and the Radiation Hygiene Certificate.

APPLICATION

Go top
Substrate preparation

The substrate should be:

• stable – sufficiently rigid,

• sufficiently long stabilized – the assumed stabilizing time for substrates is, respectively:

−for new cement plasters from ready to use ATLAS plastering mortars, min. 1 week for each 1 cm of thickness,

−for concrete walls - at least 28 days,

• dry,

• even – fill in larger irregularities and cavities with ATLAS LEVELLING MORTAR, ATLAS ZW 330 or ATLAS PLASTERING MIX, or adhesive mortars for the execution of the reinforced layer in thermal insulation systems. Before repair, prime the surface with ATLAS UNI-GRUNT emulsion,

• clean – free from layers that can deteriorate the adhesiveness of the render, especially dust, dirt, lime, oil, grease, wax, residues of oil and emulsion paints; a substrate covered with algae, fungi, etc. must be cleaned with ATLAS MYKOS agent.

Mass preparation

The product is delivered as the ready to use mix. It must not be mixed with other materials, diluted, or thickened. Mix the contents directly before application to equalize the consistency.

Mass application

Apply the priming mass onto the prepared substrate (evenly over the whole surface) using a roller or a brush, or mechanically.

Rendering

Rendering of the surface or fixing of facing can commence after the mass has completely dried, i.e. after 4 ÷ 6 hours after its application.

CONSUMPTION

Go top

The average consumption is ca. 0.3 kg of the priming mass for 1 m²..

IMPORTANT ADDITIONAL INFORMATION

Go top

• The primed surface has to be protected against direct sunlight, wind and precipitation, both during works and while setting.

• The tools must be cleaned with clean water directly after use.

• Protect eyes and skin. In case of direct contact with eyes, seek medical advice. Proceed according to the Safety Data Sheet.

TRANSPORT & STORAGE

Go top
The mass must be transported and stored in tightly sealed buckets, in dry conditions and positive temperatures (most preferably on pallets). Protect against overheating. Shelf life in conditions as specified is 12 months from the production date shown on the packaging.

PACKAGING

Go top

Plastic buckets: 5 kg, 10 kg, 15 kg and 25 kg

Pallet: 625 kg in 5 kg buckets, 650 kg in 10 kg buckets, 660 kg in 15 kg buckets, 600 kg in 25 buckets.

CAUTION

Go top

The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

At the time of publication of this product data sheet all previous ones become void.
Date of update: 2014-06-02