piksel
Helpline
ATLAS GRUNTOWNIK

ATLAS GRUNTOWNIK

fast-drying priming impregnating agent

ATLAS GRUNTOWNIK
P1  na ściany P1 na ściany
P2  na podłogi P2 na podłogi
P3  do wewnątrz P3 do wewnątrz
P4  na zewnątrz P4 na zewnątrz
N7  pędzel N7 pędzel
N9  wałek N9 wałek
D4 czas wysychania 2h D4 czas wysychania 2h

Product description

Allows for the proper surface preparation before finishing works: application of interior paint, tiles, gypsum top finish, plasters, primers, waterproofing coat.
Decreases absorption of the substrate - prevents the substrate from draining water from mortars, especially from thin-coat products (interior paints, plasters, top finish, adhesives), reduces paint consumption.
Unifies absorptivity of the whole primed surface - whole applied layer has unified bonding conditions regardless of the local changes in the parameters of the substrate.
Forms a temporary protective layer on the screeds and floors - improves resistance to dusting, facilitates cleaning (cannot be considered as a final finishing layer).

Main properties

    ƒ- for absorptive substrates - short drying time - underneath paints, adhesives, plasters, screeds - strengthens the substrate

Main parameters

    Density: approximately 1.00 g/cm³ Ambient and substrate temperature during works: from +5 ºC to +25 ºC Further works after priming: after 2 hours

USE

Go top
Allows for the proper surface preparation before finishing works: application of interior paint, tiles, gypsum top finish, plasters, primers, waterproofing coat.
Decreases absorption of the substrate - prevents the substrate from draining water from mortars, especially from thin-coat products (interior paints, plasters, top finish, adhesives), reduces paint consumption.
Unifies absorptivity of the whole primed surface - whole applied layer has unified bonding conditions regardless of the local changes in the parameters of the substrate.
Forms a temporary protective layer on the screeds and floors - improves resistance to dusting, facilitates cleaning (cannot be considered as a final finishing layer).
 
Types of finishing layers:  cladding, plasters, screeds, wallpapers, paints (refer to the paint manufacturer’s instructions), waterproofing coats

PROPERTIES

Go top
Very short drying time – finishing coats can be applied just after 2 hours.
Solvent-free – manufactured on the basis of water dispersion of acrylic resin.
Non-saponifiable during application.
Transparent after drying.
Water vapour permeable.
Non-flammable – can be used in premises without windows.

TECHNICAL DATA

Go top
GRUNTOWNIK ATLAS is an impregnating sealer for priming, manufactured on the basis of an aqueous acrylic dispersion. Priming paint with setting properties: maximum VOC content in the product 1.8 g/l, maximum allowed content of VOC - 30 g/l. VOC content 30 g/l.
Density
approximately 1.00 g/cm³
Ambient and substrate temperature during works
from +5 ºC to +25 ºC
Further works after priming
after 2 hours

TECHNICAL REQUIREMENTS

Go top
The primer is not classified as a construction product.

PRIMING

Go top
Substrate preparation
The substrate should be dry and free from dust, dirt, oil, grease, and wax. All loose layers, not properly bonded to the substrate, must be removed before the emulsion is used. Before applying the product, it is recommended to carefully protect all the adjacent surfaces with a protective foil. Difficult to remove after drying.
Emulsion preparation
GRUNTOWNIK ATLAS is produced as a ready-to-use emulsion.
Priming
Apply the emulsion upon the substrate with a roller or brush  in a thin and uniform layer.
Using the surface
Painting, wallpapering, tiling, etc., should start when the emulsion is dry, after approx. 2 hours from application.

CONSUMPTION

Go top
The average consumption is 0.05 ÷ 0.2 kg of emulsion for 1 m². Consumption depends on the absorptivity of a surface.

PACKAGING

Go top
Plastic containers: 5 kg Pallet: 540 kg in 5 kg containers

IMPORTANT ADDITIONAL INFORMATION

Go top
• Gypsum substrates should be primed before painting, following the paint manufacturer’s instructions.
• Tools should be cleaned with clean water directly after use.
• Keep out of the reach of children. Avoid contact with skin and eyes. Follow the instructions of the Safety Data Sheet.
• The product should be transported and stored in tightly closed packaging, in dry conditions, at above-zero temperatures. Protect against overheating. The emulsion shelf life is 12 months from the manufacturing date shown on the packaging.
 
The above information constitutes basic guidelines concerning the product use and does not release the user from an obligation to carry out works according to the engineering principles, and OHS regulations. At the issue date of this Data Sheet, any previous ones becomes invalid. Date of update: 2013-11-08
Go top
ATLAS GRUNTOWNIK
ATLAS GRUNTOWNIK
fast-drying priming impregnating agent

Current documentation