piksel
Helpline
ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES

ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES

ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES
P1  na ściany P1 na ściany
P2  na podłogi P2 na podłogi
P3  do wewnątrz P3 do wewnątrz
P4  na zewnątrz P4 na zewnątrz
N5  gąbka N5 gąbka
N7  pędzel N7 pędzel

Product description

ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES is manufactured on the basis of water acrylic dispersion.
Facilitates keeping cleanliness – owing to high penetration ability, permeates into top layers of tiles and grouts, and at the same time forms durable protective coat of their top surface.
Produces delicate gloss on non-glazed tiles.
Colourless – emphasises the substrate colour.
Water vapour permeable.
Resistant to typical cleaning agents – does not get washed off during standard cladding maintenance.

Main properties

  • forms micro coat protecting against penetration of dirt
  • facilitates keeping surfaces clean
  • produces delicate gloss

Main parameters

    Density: 1.0 g/cm3 Substrate and ambient temperature during application: from +5 °C up to +25 °C Floor use: after 24 hours

PROPERTIES

Go top
ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES is manufactured on the basis of water acrylic dispersion.
 
Facilitates keeping cleanliness – owing to high penetration ability, permeates into top layers of tiles and grouts, and at the same time forms durable protective coat of their top surface.
 
Produces delicate gloss on non-glazed tiles.
 
Colourless – emphasises the substrate colour.
 
Water vapour permeable.
 
Resistant to typical cleaning agents – does not get washed off during standard cladding maintenance.

USE

Go top
For protection of porous surfaces exposed to structural soiling.
 
Protects from typical household dirt: oils, grease, coffee, tea and water.
 
Reduces risk of efflorescence and biological corrosion.
 
Reduces grout surface damage resulting from water freezing in the material pores.
 
Restores fresh appearance to old matte claddings.
 
AREA OF APPLICATION
 
terrace and balcony
+
bathroom
+
kitchen
+
corridor, stairs
+
hall
+
 
SURFACE TYPE
 
cement grouts
+
highly permeable cladding (ceramic non-glazed, stone and cement tiles)
+
old ceramic cladding
+
low-permeable tiles e.g. glazed ceramic tiles
use
ATLAS IMPREGNATING SEALER FOR NATURAL STONE AND GRES
 
 

 

TECHNICAL DATA

Go top
Varnish for coating interior and exterior finishing elements, maximum VOC content in the product 5.46 g/l, maximum allowable VOC content 130 g/l.

Density
1.0 g/cm3
Substrate and ambient temperature during application
from +5 °C up to +25 °C
Floor use
after 24 hours

TECHNICAL REQUIREMENTS

Go top
Impregnating sealer is not classified as a construction product. The product has been given the Radiation Hygiene Certificate.

IMPREGNATION

Go top
Substrate preparation
The substrate should be dry, strong and free from dust, dirt, oil, grease, and wax.
 
Product preparation
ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES is manufactured as a ready-to-use product for direct application. It must not be mixed with other materials, diluted or thickened
 
Impregnation
ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES should be applied undiluted upon the substrate, with a brush or a sponge, with thin uniform coat. Avoid leaving puddles, clean excess with a cloth.  In the case of more absorptive substrates, apply another coat crosswise to the first one after approx. 30 minutes. Floor can be used not earlier than 24 hours since the application of the emulsion. Grouts may be impregnated after hardening – apply the product with a thin brush, wait at least 2 weeks since the grout application.

CONSUMPTION

Go top
The average consumption is 1 l of emulsion for approx. 15 ÷ 20 m². The actual consumption depends on the substrate absorptiveness and the cladding type.

PACKAGING

Go top
Plastic containers: 1 l

IMPORTANT ADDITIONAL INFORMATION

Go top
·         It is recommended to consult the tiles manufacturer before using the product for protection of freshly installed ceramic cladding.
 
·         Avoid application of the product on tile edges during the grout impregnation. In such case, the impregnating sealer should be immediately removed from the tiles surface.
 
·         Room where the product is applied can be used after airing until characteristic smell disappears.
 
·         Wash the tools with clean water directly after use. Remove residues of ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES with ATLAS AGENT FOR REMOVAL OF STAINS OF PAINTS, PRIMERS AND RENDERS.
 
·         Keep out of reach of children. Contains mixture of 5-chloride-2-methyl-2H-isothiasol-3-one [EC 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC 220-239-6] (3:1). May produce allergic reaction. Proceed in accordance with the Safety Data Sheet.
 
·         Keep in cool, dry, well ventilated room, in labelled and tightly sealed original container. Avoid direct sunlight, heat sources, hot surfaces and open fire. Storage temperature from +5 °C up to +30 °C. Protect from freezing. The shelf life of the product is 24 months from the date of manufacturing shown on the packaging.
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void. An up-to-date technical product documentation is available at www.atlas.com.pl/en
Date of update: 2020-07-08
Go top
ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES
ATLAS IMPREGNATING SEALER FOR GROUTS AND TILES

Current documentation