piksel
Helpline
ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTER

ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTER

ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTER
P1  na ściany P1 na ściany
P2  na podłogi P2 na podłogi
P3  do wewnątrz P3 do wewnątrz
P4  na zewnątrz P4 na zewnątrz
N7  pędzel N7 pędzel
N9  wałek N9 wałek

Product description

ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTERS is a colourless solution of a silicone dispersion in an organic solvent.
Hydrophobic action – reacts with air components and water present in the pores of the protected material, thus reduces its absorptivity and protects construction elements against excessive soaking with water.
Does not limit water vapour permeability – does not cause condensation of dampness in a partition, damp walls can get dry after the product application.
Deeply penetrating – based on a formula of organic solvents, penetrates deep into the structure of a material.
High resistance to alkali, acid rains, UV radiation and aggressive urban environment.
Colourless – emphasises substrate colour and does not affect its appearance.

Main properties

  • protects highly porous surfaces against soiling and water penetration
  • facilitates keeping the cladding clean
  • guarantees long-term unchanged surface appearance

Main parameters

    Density: approx. 0.8 g/cm³ Substrate and ambient temperature during application: from +5 °C to +25 °C Flash-point temperature: +59 °C

PROPERTIES

Go top
ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTERS is a colourless solution of a silicone dispersion in an organic solvent.
 
Hydrophobic action – reacts with air components and water present in the pores of the protected material, thus reduces its absorptivity and protects construction elements against excessive soaking with water.
 
Does not limit water vapour permeability – does not cause condensation of dampness in a partition, damp walls can get dry after the product application.
 
Deeply penetrating – based on a formula of organic solvents, penetrates deep into the structure of a material.
 
High resistance to alkali, acid rains, UV radiation and aggressive urban environment.
 
Colourless – emphasises substrate colour and does not affect its appearance.

USE

Go top
Protects against penetration of dirt and damp into the structure of the impregnated surface.
 
Prolongs endurance of the impregnated surface.
 
Enables self-cleaning of the façade top coats – water from precipitations flows freely over impregnated surface and cleans it from dust, dirt, spores and other minor contaminants.
 
Reduces risk of efflorescence and biological corrosion in the form of fungus, algae, mosses and lichens.
 
Reduces surface damage resulting from water freezing in the material pores.
 

AREA OF APPLICATION
 
façade
+
roof
+
fence wall
+
indoor decorative elements
+

 

SURFACE TYPE
 
concrete
+
cement, cement-lime plaster
+
thin-coat mineral render
+
stone wall, e.g. sandstone
+
brick or ceramic block wall
+
brick or silicate block wall
+
clinker brick wall
+
cellular concrete wall
+
gypsum block wall
+
ceramic or cement roof tiles
+

TECHNICAL DATA

Go top
Priming paint of setting characteristics: ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTER, maximum VOC content in the product 627,28 g/l, maximum allowable VOC content 750 g/l.
 
Density
approx. 0.8 g/cm³
Substrate and ambient temperature during application
from +5 °C to +25 °C
Flash-point temperature
+59 °C

TECHNICAL REQUIREMENTS

Go top
Impregnating sealer is not classified as a construction product. The product has been given the Radiation Hygiene Certificate.

IMPREGNATION

Go top
Substrate preparation
The substrate should be dry, strong and free from dust, dirt, oil, grease, wax, lime efflorescence, biological corrosion. Scratches, cracks and cavities should be filled. Product application is effective on porous and vertical or sloped surfaces.
Product preparation
ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTERS is manufactured as a ready-to-use product for direct application. It must not be mixed with other materials, diluted or thickened. Stir thoroughly before use.
Impregnation
Apply undiluted product uniformly upon the substrate, use a brush or a roller. The next coat (in the case of more absorptive substrates) can be applied when the first coat dries, i.e. after approx. 6 hours.

PACKAGING

Go top
Metal containers: 1 l, 5 l.

IMPORTANT ADDITIONAL INFORMATION

Go top
·         Elements adjacent to the impregnated surfaces (windows, doors, floors etc.) should be thoroughly protected with a protective foil.
 
·         Do not use on substrates containing materials not resistant to organic solvents within the depth of penetration of the preparation, e.g. expanded polystyrene under reinforcing layer in thermal insulation systems.
 
·         Product can have irritating smell during application.
 
·         Application on horizontal surfaces is allowed, however the efficiency of the protection is poorer.
 
·         May emphasise colour of the protected surfaces.
 
·         Room where the product is applied can be used after airing until characteristic smell disappears.
 
·         Wash the tools with clean water with solvent for solvent-based paints directly after use.
 
·         Contains trimethoxyethylsilane. Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. Repeated exposure may cause skin dryness or cracking. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of soap and water. IF SWALLOWED: Immediately call a POISON CENTER/doctor. Store in a well-ventilated place. Keep container tightly closed. Proceed in accordance with the Safety Data Sheet.
 
·         The product must be transported and stored in tightly sealed original packaging, in dry conditions and temperature from +5°C up to +30°C. During storage observe OHS regulations like for solvent-based paints and keep storage conditions like for flammable materials. Flammable liquid and vapours. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Store in a well ventilated room. The shelf life of the product is 24 months from the date of manufacturing shown on the packaging.
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void. An up-to-date technical product documentation is available at www.atlas.com.pl/en
Date of update: 2020-07-08


Go top
ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTER
ATLAS IMPREGNATING SEALER FOR SANDSTONE, BRICK AND PLASTER

Current documentation