piksel
Helpline
ATLAS SALTA N

ATLAS SALTA N

façade silicone paint

ATLAS SALTA N
P1  na ściany P1 na ściany
P4  na zewnątrz P4 na zewnątrz
W1  mrozoodporność W1 mrozoodporność
W2  wodoodporność W2 wodoodporność
N7  pędzel N7 pędzel
N9  wałek N9 wałek
N10 natrysk N10 natrysk

Product description

ATLAS SALTA N paint is the highest quality product based on silicone resin, polymer dispersion, organic and inorganic pigments, modifiers and hydrophobing agents.

Main properties

  • long term durability and façade protection
  • outstanding colour durability
  • self-cleaning ability
  • early resistance to rain
  • highly resistant to algae and lichens
  • no primer required

Main parameters

  • 400 SAH colours
  • consumption: approx. 0.15 - 0.25 l/m²

USE

Go top
PLACE OF USE
façades in thermal insulation systems with polystyrene
+
façades in thermal insulation systems with mineral wool
+
solid wall
+
ceilings (bottom side)
+
walls indoors
use ATLAS SALTA E
 
OBJECT TYPE
residential housing
+
public access, healthcare, educational care, offices
+
commercial and service
+
industrial
+
warehouses
+
outbuildings
+
heritage buildings
ATLAS SALTA S recommended
passive housing
+
energy efficient buildings
+
 
OBJECT SETTING
city and urban areas
+
rural and agriculture areas
+
close to forests and clusters of greenery
+
wet and damp areas, close to water reservoirs
+
industrial areas, economic and investment zones
+
shaded areas
+
 
SUBSTRATE TYPE
concrete (monolithic and prefabricated)
+
base coat of listed thermal insulation systems
+
traditional plasters - cement and cement-lime
+
traditional plasters – lime and renovating
ATLAS SALTA S recommended
gypsum plasters, finishing coats and fillers
+
thin-coat renders - mineral
+
thin-coat renders - silicate
ATLAS SALTA S recommended
thin-coat renders - acrylic
ATLAS SALTA E recommended
thin-coat renders – silicone and silicone-silicate
+
rough walls made of ceramic, silicate hollow blocks, bricks and cellular concrete
+
plasterboards, OSB boards
+
paint coats - silicate
ATLAS SALTA S recommended
paint coats - silicone
+
paint coats - acrylic
ATLAS SALTA E recommended
PLACE OF USE
façades in thermal insulation systems with polystyrene
+
façades in thermal insulation systems with mineral wool
+
solid wall
+
ceilings (bottom side)
+
walls indoors
use ATLAS SALTA E
 
OBJECT TYPE
residential housing
+
public access, healthcare, educational care, offices
+
commercial and service
+
industrial
+
warehouses
+
outbuildings
+
heritage buildings
ATLAS SALTA S recommended
passive housing
+
energy efficient buildings
+
 
OBJECT SETTING
city and urban areas
+
rural and agriculture areas
+
close to forests and clusters of greenery
+
wet and damp areas, close to water reservoirs
+
industrial areas, economic and investment zones
+
shaded areas
+
 
SUBSTRATE TYPE
concrete (monolithic and prefabricated)
+
base coat of listed thermal insulation systems
+
traditional plasters - cement and cement-lime
+
traditional plasters – lime and renovating
ATLAS SALTA S recommended
gypsum plasters, finishing coats and fillers
+
thin-coat renders - mineral
+
thin-coat renders - silicate
ATLAS SALTA S recommended
thin-coat renders - acrylic
ATLAS SALTA E recommended
thin-coat renders – silicone and silicone-silicate
+
rough walls made of ceramic, silicate hollow blocks, bricks and cellular concrete
+
plasterboards, OSB boards
+
paint coats - silicate
ATLAS SALTA S recommended
paint coats - silicone
+
paint coats - acrylic
ATLAS SALTA E recommended

PROPERTIES

Go top
Self-cleaning ability – owing to the content of silicone resin and siloxane hydrophobic agents the coated surface cleans itself during precipitation.
Low absorptiveness – great content of polymer binders and hydrophobing agents ensures high level of protection against draining water and moisture.
High vapour permeability – provides free transport of water vapour through the painted substrate.
Perfect applicability and spreading – the mix of thinners brings excellent workability, eliminates splashing during application with rollers, ensures complete filling of space between aggregate, even in case of thick texture (at first coating).
High elasticity – paint does not peel off and crack, works well with the substrate and compensates façade thermal strains.
Early resistance to rain – optimum setting time ensures complete resistance to rain just after 2 hours since application.
Free arrangement - palette of 400 popular colours, in accordance to SAH Colour Scheme for Renders and Paints. Individual colours based on a sample available as well.
Great coating and colour durability – owing to the use of organic and inorganic pigments (including titanium white) of improved resistance to UV radiation, it ensures excellent and durable effect after single coating.
BIO PROTECTION system – owing to high level of hydrophobisation and content of biocide capsules, it forms active protective barrier, which creates unfavorable conditions for fungi and algae growth and ensures long term aesthetics.
Application in low temperature (from 0°C) and high humidity (above 80%) – after adding ATLAS ESKIMO agent.
Recommended upon fresh renders – can be applied upon fresh mineral renders just after 5 days since their application.

TECHNICAL DATA

Go top
ATLAS SALTA N wall paint for outdoor use: maximum content of VOC in the product: 39.9 g/l, maximum allowable content of VOC: 40 g/l.
Density
approx. 1.44 g/cm³
Paint preparation, substrate
and ambient temperature during work
from +5°C to +30°C
Next coat application*
after approx. 6 h
Time of drying*
approx. 2 h
Gloss G
G3 – matt
Coat thickness E
100 < E3 <200 μm
Grain size
S1 – fine < 100 μm
Water vapour permeability coefficient V
medium
15 < V2 < 150 [g/m²d]
Water absorptiveness
low
W3 < 0.1 [kg/m²h0,5]
Diffusion resistance Sd
0.14 – 1.4
Coating strength
class 1/ coverage 8 m²
pH
8
Bonding grade (acc. to PN-80/C-81531)
1
Scrub resistance (acc. to PN 81913)
min. 10,000 cycles
Diffusion resistance coefficient μ
700-7,000 (1,140)
Carbon dioxide permeability C
C1
*) for setting conditions: temperature +20oC, air humidity 50%

TECHNICAL REQUIREMENTS

Go top
The paint ATLAS SALTA N is listed in the following European Technical Assessments and ITB Approvals as an element of composite thermal insulation systems (ETICS):
System name
Technical Approval No.
Certificate No.
ATLAS
ETA 06/0081
EC 1488-CPD-0021
ATLAS ROKER
ETA 06/0173
EC 1488-CPD-0036
ATLAS ETICS
AT-15-9090/2016
FPC-ITB-0562/Z
ATLAS ETICS PLUS
AT-15-9784/2016
FPC-ITB-0738/Z
ATLAS RENOTER
AT-15-8477/2016
FPC-ITB-0456/Z
ATLAS ROKER G
AT-15-7314/2016
FPC-ITB-0222/Z

PAINTING

Go top
Substrate preparation
The substrate should be dry, stable and structurally sound, i.e. appropriately strong and free of layers which would impair paint bonding, in particular dust, dirt, wax and grease. Old, poor quality paint coatings and other poorly bonded layers should be thoroughly removed. Any gaps and cracks should be repaired and floated.
Detailed guidelines on the substrate priming.
Freshly applied thin-coat renders
priming not required
Existing substrates of low absorptiveness
priming not required
Existing substrates of high absorptiveness
ATLAS ARKOL NX
Detailed guidelines on the substrate stabilization before painting.
Thin-coat mineral renders
5 days
Thin-coat dispersion renders
7 days
Traditional mineral plasters
2-4 weeks
 
Paint preparation
The paint is delivered ready to use. Mix well before use in order to unify consistency. In case of uncolored paint base remove the foil divider first.
Paint dilution
For the application of the first coat the paint can be diluted, particularly in case of application in substrate or ambient temperature close to allowable maximum (+25°C). Use max. 5% of water for dilution (volume ratio) – max. 0.5 l of water for 10 l of paint. Keep the same dilution ratio over the whole painted surface. Use undiluted paint for final painting.
Painting
Apply the paint upon prepared and primed substrate with thin and uniform coat. Paint with a roller, a brush or a sprayer, with one or two coats depending on the substrate absorptiveness and texture. Technological breaks have to be planned in advance, e.g. in corners and angles of a building, under rainwater pipes, on lines of contact of two colours, etc. Apply the paint continuously (using the “wet on wet” method), avoid breaks in application, do not coat partially dried paint. The time of drying depends on substrate, temperature and relative air humidity and can vary from approx. 2 up to 6 hours.

CONSUMPTION

Go top
Consumption depends on substrate absorptiveness and surface texture. The actual consumption can be established on basis of sample application upon particular substrate. The average consumption for one coat painting upon renders and plasters is listed in the table below.
Render/plaster type
Consumption for 1 m²
Coverage of 1l
Thin-coat mineral renders
approx. 0.25 l
approx. 4.0 m²
Thin-coat dispersion renders
approx. 0.22 l
approx. 4.5 m²
Smooth plasters
approx. 0.15 l
approx. 6.6 m²

IMPORTANT ADDITIONAL INFORMATION

Go top
• Painting must not be carried out in high humidity and low temperature below +5°C (with ATLAS ESKIMO below 0°C). Protect the painted surface both during application and paint drying against direct sunlight, wind and precipitation. In adverse weather conditions, application of the third coat may be necessary to unify the surface.
• When painting fresh render/plaster, façade must be protected with covers since the commencement of rendering/plastering until 24 hours since completion of painting. Fresh mineral renders stabilize within minimum 5 days in favorable conditions (temperature above +5°C, humidity below 65%). In adverse weather conditions the time of setting can extend.
• When painting old renders/plasters, at least 48 hours of drying must be provided since the end of precipitation (the higher air humidity, the longer this time should be).
• Failure to observe the manufacturer’s requirements concerning substrate preparation, technology of use and façade protection can lead to natural phenomenon of discolouration and salt efflorescence.
• Surface colour uniformity depends largely on dryness of the substrate.
• In order to avoid differences in colour shades an individual surface should be coated with paint of the same manufacturing date
• As a result of painting, natural slight smoothing of substrate texture occurs. Painting surfaces differing in surface structure and technological parametres can result in the effect of various shades of the same paint colour.
• Clean the tools with clean water directly after use, before paint setting.
• Harmful to aquatic life with long lasting effects. Keep out of reach of children. Read label before use. Avoid release to the environment. Dispose of contents/container to appropriately labeled containers designed for selective waste treatment, emptied by an authorized company. Follow the instructions of the Safety Data Sheet.
• Keep in cool, dry and well ventilated place in tightly sealed original and labeled containers. Protect against direct sunlight, heat sources, hot surfaces and open flames. Temperature of storage: from +5°C up to +30°C. Protect against freezing. Shelf life is 12 months from the production date shown on the packaging.

PACKAGING

Go top
Plastic buckets: 10 l
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void.
Date of update: 2017-05-04
Go top
ATLAS SALTA N
ATLAS SALTA N
façade silicone paint

Current documentation