piksel
Helpline
ATLAS SMB BITUMINOUS MEMBRANE

ATLAS SMB BITUMINOUS MEMBRANE

self-adhesive asphalt membrane

ATLAS SMB BITUMINOUS MEMBRANE
P1  na ściany P1 na ściany
P2  na podłogi P2 na podłogi
P3  do wewnątrz P3 do wewnątrz
P4  na zewnątrz P4 na zewnątrz

Product description

Waterproofing of underground building elements, e.g. foundations, retaining walls, etc.
Waterproofing of terraces and balconies.

Main properties

  • SBS – modified
  • waterproof and damp-proof
  • vapour barrier
  • for balconies, terraces, foundations
  • for cellars, underground garages

Main parameters

  • Keeps elasticity parameters even in temperature -30°C
  • Membrane dimensions – width 1.0 m, length 15.0 m, thickness 1.5 mm

USE

Go top
Waterproofing of underground building elements, e.g. foundations, retaining walls, etc.
Waterproofing of terraces and balconies.
Can be used indoors – in cellars, underground garages, halls, warehouses, etc.
Execution of vapour barrier layers of terraces – diffusion equivalent of a single layer Sd = 488 m.

Types of waterproofed substrates – concrete, cement screeds, galvanized steel sheet, extruded polystyrene boards, polystyrene boards.

PROPERTIES

Go top
Self – adhesive properties.
Keeps elasticity parameters even in temperature -30°C.
Easy in use – unlike heat – welded membranes does not require the use of torches, etc.
Membrane dimensions – width 1.0 m, length 15.0 m, thickness 1.5 mm.

TECHNICAL DATA AND REQUIREMENTS

Go top
ATLAS SMB BITUMINOUS MEMBRANE is a roll bitumen membrane formed in one-side thick foil coating with SBS-modified asphalt.

CE 1434
    13 
PN-EN 13969:2006
and PN-EN 13969:2006/A1:2007
Asphalt product for damp proofing (Type A) and for waterproofing of underground elements (Type T). For indoor and outdoor use. 1m x 15m x 1.5 mm, polyethylene foil, asphalt modified with SBS, back side protected with an anti-adhesion divider. For fixing with the membrane self-adhesive properties.
Reaction to fire
E
Watertightness
meets the requirements (60 kPa)
Impact resistance
350 mm (A method)
Joint strength in direction:
-          along 200N/50mm±50N/50 mm
-          across 225N/50mm±50N/50 mm
Elasticity
-30°C
Tensile strength in direction:
-          along 225N/50mm ± 50N/50mm
-          across 225N/50mm ± 50N/50 mm
Expansion in direction:
-          along 200% ± 50%
-          across 200% ± 50%
Static load resistance (method B)
10 kg
Tear strength in direction:
-          along 125 ± 50 N
-          across 125 ± 50 N
Durability:
-          after ageing
-          after chemical action
 
-          meets the requirements
-          according to the appendix A of the standard
Release/content of hazardous substances
See: Safety Data Sheet

 

CE 1434
    13 
PN-EN 14967:2007
Asphalt product for damp proofing. For indoor and outdoor use. 1m x 15m x 1.5 mm, polyethylene foil, asphalt modified with SBS, back side protected with an anti-adhesion divider. For fixing with the membrane self-adhesive properties.
Reaction to fire
E
Watertightness
meets the requirements (60 kPa)
Impact resistance
350 mm (A method)
Elasticity
-30°C
Tensile strength in direction:
-
Expansion in direction:
-
Static load resistance
-
Durability:
-          after ageing
-          after chemical action
 
-          meets the requirements
-          according to the appendix A of the standard
Release/content of hazardous substances
See: Safety Data Sheet

 The product conforms to PN-EN 13969:2006 and PN-EN 13969:2006/A1:2007 standards. Factory Production Control Certificate no. 1434-CPD-0176.
The product conforms to PN-EN 14967:2007 standard.
EC Declaration of Performance no. 043-CPR-2013/07/01.
The product has been given the Hygienic Certificate no. 85/322/95/2013.

WATERPROOFING

Go top
Substrate and membrane preparation
Substrate should be dry, even, mechanically strong, with no loose contaminants, oily stains or water. Absorptive substrate, such as concrete or screed, should be primed with GENERAL-PURPOSE BITUMINOUS COMPOUND. In lower ambient temperature, the membrane should be stored within 24 hours before use in temperature not lower than +18°C. The substrate onto which the membrane is to be applied, should be dry, free from frost and rime.
Membrane fixing
Membrane should be fixed, using its self – adhesive properties. Remove the foil from the back side when unrolling the roll. Press the whole membrane surface onto the substrate, particularly carefully on overlaps. It is advised to conduct the fixing in temperature above 0°C, which enables quick bonding of the membrane to the substrate. When applying the subsequent rolls, it is obligatory to keep the membrane overlaps:
- approx. 9 cm wide on joints along the membrane band,
- approx. 12 cm wide on the joints across the membrane band.
Every time, when finishing the installation, it is obligatory to check the correctness of joints on overlaps. The upper edge of the membrane used as the vertical waterproofing should be fixed to concrete mechanically, e.g. with the use of fixings with rings. The perfect solution is to end the upper edge with a pressing bead. It ensures clamp and tightness of the joint all along the membrane. At zones where the membrane passes from horizontal onto vertical surface, it should be additionally heated on vertical overlaps with a small torch, which improves the bonding strength.

IMPORTANT ADDITIONAL INFORMATION

Go top
• The back side of the membrane band is protected from sticking with paper or foil, which should be removed during the membrane installation.
• The membrane rolls must be protected during transport and storage against dampness, direct sunlight, kept in a single layer in vertical position, in a way preventing its moving and damaging. The membrane rolls should be stored on even ground, max. 1,200 pcs, keep the distance of 80 cm from the next product batch and min. 120 cm from the heaters.
• Follow the transport safety regulations during transport.

PACKAGING

Go top
Number of rolls on a pallet: 15 pcs.
 
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void.
Date of update: 2015-11-06
Go top
ATLAS SMB BITUMINOUS MEMBRANE
ATLAS SMB BITUMINOUS MEMBRANE
self-adhesive asphalt membrane

Current documentation