piksel
Helpline
ATLAS ZŁOTY WIEK F-01

ATLAS ZŁOTY WIEK F-01

mortar for castings

ATLAS ZŁOTY WIEK F-01

Product description

For making castings (in open moulds) and filling moulds.
For making of construction elements (banisters, balusters, cantilevers) and decorative architectonic details.

Main properties

    Main parameters

    • fine granulation - aggregate up to 0.5 mm
    • compressive strength: ca. 25 N / mm²
    • consumption: ca. 2.0 kg / 1 dm³
    • waterproof

    USE & PROPERTIES

    Go top

    ·          for making castings (in open moulds) and filling moulds

    ·          for making of construction elements (banisters, balusters, cantilevers) and decorative architectonic details

    ·          mineral – based on hydraulic binder

    ·          combines favorable working parameters and the ease of obtaining uniform casts characteristic of gypsum mortars with high resistance and advantages offered by hydraulic binder

    ·          available in grey colour

    ·          fine-aggregate (aggregate up to 0.5 mm) – can be a perfect imitation of gypsum masses

    ·          characterized by low absorptivity and very low contraction

    ·          material developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties

    ·          for indoor and outdoor application

    ·          waterproof

    ·          frost resistant

    APPLICATION

    Go top

    Pour the dry mix from the bag into a clean container with the suitable amount of water (recommended proportions: 5.0 – 5.5 l/25 kg) and mix mechanically until homogenous, lump free and without separating liquid. Use slow rotating mixer to avoid excessive aeration of the mortar. The mortar is ready to use after ca. 5 minutes and remixing. Pour the prepared mortar slowly and carefully into previously prepared moulds, protected with anti-adhesive agents. Demoulding of the cast elements can take place not earlier than after about 24 hours.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek medical assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE F-01 is a factory made dry mix manufactured on the basis of the highest quality hydraulic binder and quartz fillers with the addition of liquefying substances, agents improving adhesion and resistance to weather conditions.

    Mixing proportions: water/dry mix
    5.0 – 5.25 l/25 kg
    Pot life
    ca. 1 hour
    Compressive strength
    ca. 25 N/mm²
    Flexural strength
    ca. 6 N/mm²
    Contraction
    0.22 mm/rm
    Total water absorption
    ca. 2%
    Porosity
    ca. 5%
    Consumption

    ca. 2 kg of mortar for 1 dm³

    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +25°C
    Available packaging
    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
    Go top
    ATLAS ZŁOTY WIEK F-01
    ATLAS ZŁOTY WIEK F-01
    mortar for castings

    Current documentation