piksel
Helpline
ATLAS ZŁOTY WIEK SH

ATLAS ZŁOTY WIEK SH

silicone hydrophobic agent

ATLAS ZŁOTY WIEK SH

Product description

For hydrophobization and protection of absorptive stone materials and other typical construction substrates, e.g. ceramic and silicate brick, aerated concrete, concrete, paving blocks and cement tiles against adverse effects of the environment.

Main properties

    Main parameters

    • high penetration ability
    • flash-point: 34 °C
    • consumption: ca. 0.1 – 0.3. l / 1m²

    USE & PROPERTIES

    Go top

    ·          for hydrophobization and protection of absorptive stone materials and other typical construction substrates, e.g. ceramic and silicate brick, aerated concrete, concrete, paving blocks and cement tiles against adverse effects of the environment

    ·          after evaporation of the solvent, the active agent reacts with the components of the air and with water contained in the pores of the material, lowering this way the absorptivity of the protected surface

    ·          high penetration ability – due to low viscosity and-small molecule structure, it penetrates the substrate to the depth ensuring optimum hydrophobization of the surface

    ·          it is durable and resistant to alkali, therefore the impregnation treatment does not have to be repeated periodically

    ·          does not deteriorate the properties of the protected materials in terms of gas and water vapor diffusion, the pores remain open

    SUBSTRATE PREPARATION

    Go top

    The method of surface cleaning must be individually adjusted for each object, depending on the strength and condition of the substrate material and its historic value. Before impregnation, the substrate must be cleaned from dust, dirt, patina, efflorescence, loose and crumbling pieces and residues of grease, oils and wax. Any holes in the substrate should be repaired prior to hydrophobic treatment. Note! ATLAS GOLDEN AGE SH must not be used on substrates affected with salt corrosion, as it may intensify the process.

    APPLICATION

    Go top

    ATLAS GOLDEN AGE SH is manufactured as a ready to use product. It must not be combined with other materials, diluted or thickened. The agent is applied by painting once or twice, depending on the type and absorptivity of the substrate. Special care should be taken to ensure uniform spreading of the agent in ample amounts over the substrate being treated. The second coat can be applied after the first one has dried completely (after about 6 hours). Freshly impregnated surfaces should be protected from precipitation for several more days. Note! Do not use on substrates containing polystyrene or other building materials not resistant to organic solvents (e.g. expansion joint sealants, latex materials) at the depth of penetration of the agent.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The product must be stored and transported in original, tightly sealed containers in dry conditions and positive temperatures between +5°C and +20°C. Protect against overheating. During storage observe OHS regulations like for solventbased paints and keep storage conditions like for flammable materials. Limit the contact of open container with the air to the necessary minimum.

    ·          Harmful substance. Contains low-boiling hydrotreated kerosene fraction. Dangerous to the environment. Flammable. Toxic to water organisms; can cause long lasting adverse changes in water environment. Harmful; can lead to lung damage on indigestion. Repeated exposure can lead to skin drying and cracking. Vapors can induce drowsiness and dizziness. Keep out of the reach of children. Avoid contamination of skin and eyes. Do not release into the sewage system, use appropriate containers preventing contamination of environment. Dispose of the product and the packaging as hazardous product. Avoid discharge into environment. Proceed according to the instruction or Specification Sheet. In case of ingestion do not induce vomiting, consult the doctor immediately and show the packaging or the label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE SH is a single-component solution of silicone dispersion in organic solvent.

    Density
    0.8 g/cm³
    Flash-point
    34 °C
    Consumption,

    depending on the type and absorptivity of the substrate.

    ca. 0.1 – 0.3. l of agent for 1m²
    Substrate and ambient temperature during works

    from +5°C to +20°C

    Available packaging

    steel containers 5 kg, cans 1 kg
    Go top
    ATLAS ZŁOTY WIEK SH
    ATLAS ZŁOTY WIEK SH
    silicone hydrophobic agent

    Current documentation