piksel
Helpline
ATLAS ZŁOTY WIEK SM

ATLAS ZŁOTY WIEK SM

moulding finishing coat

ATLAS ZŁOTY WIEK SM

Product description

For execution of finishing coats of drawn mouldings and for surface leveling and filling of small cavities in the substrate.
Recommended for finishing the surface of cores executed before in ATLAS GOLDEN AGE ZMP or ATLAS GOLDEN AGE ZMP-R mortars.

Main properties

    Main parameters

    • layer thickness: 3 – 10 mm
    • hydrophobic
    • consumption: ca. 1.5 kg / 1 m²
    • manufactured in white colour

    USE & PROPERTIES

    Go top

    ·          for execution of finishing coats of drawn mouldings and for surface leveling and filling of small cavities in the substrate

    ·          recommended for finishing the surface of cores executed before in ATLAS GOLDEN AGE ZMP or ATLAS GOLDEN AGE ZMP-R mortars

    ·          for application on concrete and brick substrates and on cement and lime plasters

    ·          for indoor and outdoor application

    ·          recommended layer thickness is 3 – 10 mm

    ·          contains special polypropylene fibres additionally reinforcing the coat and limiting the possibility of occurrence of cracks

    ·          hydrophobic

    ·          material developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties

            manufactured in white colour

    SUBSTRATE PREPARATION

    Go top

    The method of surface cleaning must be individually adjusted for each object, depending on the strength and condition of the substrate material and its historic value. When filling cavities, the substrate must be sound, free from dust, dirt, or other contamination. Hammer off poorly adhering pieces of the surface and remove loose or weak parts with a steel brush. Before the application of ATLAS GOLDEN AGE SM-FINISZ finishing coat, the cleaned surface must be damp but not wet. If the reduction of the absorptivity of the substrate is necessary, the application of ATLAS UNI-GRUNT priming emulsion is recommended.

    APPLICATION

    Go top

    Pour the dry mix from the bag into a clean container with the suitable amount of water (recommended proportions: 7.0 l/15 kg) and mix mechanically until homogenous, lump free and without separating liquid. The mortar is ready to use after ca. 5 minutes and remixing. Apply the mortar over the substrate in a layer of even thickness and then shape in a continuous manner using a moulding profile. The open time (between the application of the mortar and drawing the profile) depends on the absorptivity of the substrate, ambient temperature and mortar consistency. In case of filling cavities, filling larger holes first is recommended. Protect freshly applied layers from excessive drying.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek medical assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE SM is a factory made dry mix manufactured on the basis of the highest quality hydraulic binder, quartz fillers and additives.

    Mixing proportions: water/dry mix
    7 l/15 kg
    Pot life
    ca. 2 hours
    Open time
    ca. 15 minutes
    Consumption

    ca. 1.5 kg of mortar for 1 m²

    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +25°C
    Available packaging

    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
    Go top
    ATLAS ZŁOTY WIEK SM
    ATLAS ZŁOTY WIEK SM
    moulding finishing coat

    Current documentation