piksel
Helpline
ATLAS ZŁOTY WIEK SW 300

ATLAS ZŁOTY WIEK SW 300

reinforcing agent

ATLAS ZŁOTY WIEK SW 300

Product description

Single-component agent of the latest generation for reinforcing typical construction substrates.
For impregnation of elements made of natural stone, brick and other construction materials degraded by time and weather.
Does not act as hydrophobic agent, so the treated surface can still be cleaned and repaired with the use of mineral mortars.

Main properties

    Main parameters

    • active agent content - 75%
    • precipitated gel content - 30%
    • consumption: ca. 0.1 – 0.3. l / 1m²

    USE & PROPERTIES

    Go top

    ·          single-component agent of the latest generation for reinforcing typical construction substrates

    ·          for impregnation of elements made of natural stone, brick and other construction materials degraded by time and weather

    ·          general-purpose – can be used both for initial and structural impregnation

    ·          does not act as hydrophobic agent, so the treated surface can still be cleaned and repaired with the use of mineral mortars

    ·          does not seal the pores of the material and does not limit the vapour permeability

    ·          characterized by high degree of precipitated gel content, at the level of 30% - results in significant increase of the durability of the impregnated substrate, recommended for reinforcement of very weak substrates

    ·          high penetration ability – penetrates deep into the structure of the weakened substrate, reinforcing it evenly

    ·          resistant to alkali and weather conditions, e.g. acid rains

    ·          single-component – easy to use

    SUBSTRATE PREPARATION

    Go top

    The method of surface cleaning must be individually adjusted for each object, depending on the strength and condition of the substrate material and its historic value. The substrate must be cleaned from dust, dirt, patina, efflorescence, loose and crumbling pieces and residues of grease, oils and biological contamination. Patina and other permanent pollution of the substrate surface weaken the effects of the agent, because they limit its absorption. In case of very weak or weathered substrate, initial impregnation with ATLAS GOLDEN AGE SW 300 is recommended, than cleaning and finally the proper reinforcing treatment.

    APPLICATION

    Go top

    ATLAS GOLDEN AGE SW 300 is manufactured as a ready to use product. It must not be combined with other materials, diluted or thickened. The agent is applied by painting once or twice, depending on the type and absorptivity of the substrate. Special care should be taken to ensure uniform spreading of the agent on the substrate being treated. The second coat can be applied after the first one has dried completely (after about 6 hours). Freshly impregnated surfaces should be protected from precipitation for several more days.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use.

    ·          The shelf life of the product is 24 months from the production date shown on the packaging. The agent must be stored in original, tightly sealed containers in dry conditions, temperature between +5°C to +20°C, away from open fire sources. Protect against overheating. Limit the contact of open container with the air to the necessary minimum.

    ·          Flammable product. Irritates skin. Harmful when inhaled, creates serious hazard to health in result of long time exposure. Harmful to water organisms; can cause long lasting adverse changes in water environment. Possible harmful effect upon child in mother’s womb (Rep. cat. 3). Harmful, can damage lungs on ingestion. Vapors can cause sleepiness and dizziness. Harmful. Contains TEOS and toluene. Keep out of the reach of children. do not inhale vapors or aerosol. Wear appropriate protective clothing and protective gloves. Do not discharge into sewer system and dispose of the product and the packaging in a safe way. Avoid discharges into environment. Proceed according to the instruction or data sheet. In case of ingestion do not induce vomiting, immediately seek doctor’s advice and show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE SW 300 reinforcement compound is manufactured from silicone resin and organic solvent.

    Density
    1.0 g/cm³
    Precipitated gel content
    30%
    Consumption
    ca. 0.1 – 0.3. l of agent for 1m²
    Active agent content
    75%

    Substrate and ambient temperature during works

    from +5°C to +20°C
    Available packaging
    steel containers 5 kg, cans 1 kg
    Go top
    ATLAS ZŁOTY WIEK SW 300
    ATLAS ZŁOTY WIEK SW 300
    reinforcing agent

    Current documentation