piksel
Helpline
ATLAS ZŁOTY WIEK TCL

ATLAS ZŁOTY WIEK TCL

scraped plaster

ATLAS ZŁOTY WIEK TCL

Product description

Recommended for decorative plaster coating on rough surfaces of ceramic and lime-sand brick, natural stone, concrete, cement and cement-lime plaster and renovation plaster.
Cement-based – the obtained surface is resistant to weather conditions and mechanical damage.

Main properties

    Main parameters

    • compressive strength: 1.5 – 5.0 N/mm²
    • consumption: ca. 18 kg / 1 m² / 10 mm layer thickness
    • coat thickness - 5 - 30 mm
    • waterproof

    USE & PROPERTIES

    Go top

    ·          recommended for decorative plaster coating on rough surfaces of ceramic and lime-sand brick, natural stone, concrete, cement and cement-lime plaster and renovation plaster

    ·          for manual application

    ·          cement-based – the obtained surface is resistant to weather conditions and mechanical damage

    ·          vapour permeable – enables free transport of water vapour and releasing the humidity by the material upon which it has been applied

    ·          possibility of dyeing in mass and ordering the plaster in version with with mica flakes

    ·          material developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties

    ·          for indoor and outdoor application

    ·          waterproof

    ·          frost resistant

    SUBSTRATE PREPARATION

    Go top

    The method of surface cleaning must be individually adjusted for each object, depending on the strength and condition of the substrate material and its historic value. The substrate must be sound, free from dust, dirt, efflorescence, remains of painting coats. Hammer off poorly adhering pieces of the surface and remove loose or weak parts with steel brush. Directly before the application of plaster wet the surface well with water – until saturation.

    APPLICATION

    Go top

    Pour the dry mix from the bag into a clean container with the suitable amount of water (recommended proportions: 3.5 – 4.0 l/25 kg) and mix mechanically until homogenous, lump free and without separating liquid. The mortar is ready to use after a few minutes from mixing. It is recommended to mix the content of a few bags in a bigger container simultaneously. Remix directly before application. Apply the mortar manually with a trowel, in an even layer of ca. 10 mm. Level the resulting surface with a long rule and leave for initial setting. The moment of floating must be established experimentally in order not to allow excessive drying of the plaster. Perform scraping test – if the mortar does not stick to the spikes of the scrub plane, scraping can start. Evenly scrape the top surface of the plaster using scraping scrub plane. Avoid repeated scraping at the same place, as this can result in differences in shade. After the mortar has set, clean the surface with soft brush. In order to increase the plaster resistance against weather conditions, impregnation with ATLAS GOLDEN AGE SH is recommended. While applied plaster is drying, provide appropriate ventilation of the rooms indoors. Protect plasters applied outdoors from drying too fast.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek doctor’s assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE TCL is a factory made dry mix manufactured on the basis of the highest quality white cement, quartz and dolomite fillers and new generation components making it plastic and easy to work with. The product conforms to PN-EN 998-1 standard. EC Declaration of Performance No. AZW TWL/CPR.

    Mixing proportions: water/dry mix
    3.5 - 4.0 l/25 kg
    Pot life
    ca. 2 hours
    Open time
    ca. 15 minutes
    Consumption
    ca. 18 kg of mortar for 1 m²
    at 10 mm layer thickness
    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +25°C
    Min. / max. coat thickness
    5 mm / 30 mm
    Available packaging
    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
     

    Factory made plastering mix of specified properties,

    for renovation (R),

    suitable for indoor and outdoor use

    CE 13
    Reaction to fire - class
    A1
    Adhesion
    ≥ 0.3 N / mm² - FP:B
    Compressive strength
    1.5 – 5.0 N/mm²
    Water absorption
    ≥ 0.3 kg / m² after 24 hours
    Water penetration
    ≤ 5 mm
    Water vapour permeability coefficient μ
    ≤ 15/35
    Thermal conductivity coefficient
    (average tabular value P=50%)
    0.67 W / mK (λ10,dry)
    Gross dry density
    ≤ 1700 kg/m³
    Durability.
    Mass decrement after freeze-thaw cycles
    < 1%
    Durability.

    Compressive strength decrease after freeze-thaw cycles

    < 10%
    Go top
    ATLAS ZŁOTY WIEK TCL
    ATLAS ZŁOTY WIEK TCL
    scraped plaster

    Current documentation