piksel
Helpline
ATLAS ZŁOTY WIEK TR

ATLAS ZŁOTY WIEK TR

renovation plaster

ATLAS ZŁOTY WIEK TR

Product description

For execution of renovation plasters on damp and saline surfaces of brick and natural stone.
Recommended for historical buildings, on foundations, cellar walls and above the ground floors.
Developed according to WTA instruction guidelines.

Main properties

    Main parameters

    • compressive strength: 1.5 – 5.0 N/mm²
    • coat thickness: 10 - 20 mm
    • consumption: ca. 12 – 14 kg / 1 m² / 10 mm layer thickness
    • waterproof

    USE & PROPERTIES

    Go top

    ·          for execution of renovation plasters on damp and saline surfaces of brick and natural stone

    ·          recommended for historical buildings, on foundations, cellar walls and above the ground floors

    ·          developed according to WTA instruction guidelines

    ·          element of ATLAS GOLDEN AGE renovation plasters system. The system consists of three plaster types optimally combined in terms of physical and chemical parameters, plasters whose application ensures appropriate interaction of consecutively applied layers and guarantees durability and effectiveness of renovation works

    ·          universal – can be applied directly upon the substrate at low salinity level or upon previously applied layer of ATLAS GOLDEN AGE TRP base coat plaster, in case of medium or high salinity level in the substrate

    ·          it is the top layer – designed for final finishing with plaster or painting

    ·          characterized by high porosity and therefore high ability of retention of crystallizing salt

    ·          large amount and volume of pores in the set mortar provides perfect vapour permeability of the coat, enabling free evaporation of damp and fast drying of the substrate

    ·          contains hydrophobic components – reducing the surface absorptivity of the plaster, owing to which the surface is protected against effects of precipitation and water penetration

    ·          for manual or machine application

    ·          for indoor and outdoor application

    ·          waterproof

    ·          frost resistant

    SUBSTRATE PREPARATION

    Go top

    Before commencing works in connection with the application of renovation plastering, it is recommended to establish the salinity level of the substrate. In case of low salinity level, ATLAS GOLDEN AGE TR renovation plaster can be applied directly upon the previously applied ATLAS GOLDEN AGE TRO scratch coat. Whereas in case of medium or high salinity level the application of ATLAS GOLDEN AGE TRP renovation base coat plaster is required. Remove damp and saline plasters to the height of 80 cm above the highest visible salinity and/or dampness borderline. Hammer off masonry mortar from the joints to the depth of ca. 20 mm. Further on, clean the exposed surface of the wall from dust, efflorescence, residues of mortar and weakly adhering elements of the wall. Note! Remove the debris from the site at once. Next, wet the substrate with water and execute the contact layer of ATLAS GOLDEN AGE TRO renovation scratch coat, applied in an openwork layer 5 mm thick, covering not more than 50% of the substrate. After it has set, ca. 24 hours, the proper layer of ATLAS GOLDEN AGE TRP renovation base coat can be applied.

    APPLICATION

    Go top

    Prepare the mortar by pouring the dry mix into a container with a suitable amount of water and mixing mechanically until homogenous, free from lumps and separating liquid. Recommended proportions are 4.60 liters of water to 25 kg of the dry mix. The plaster can also be prepared in plastering units. Apply the plaster in an even layer, manually or mechanically upon the appropriately set scratch coat or base coat. Remove the excess of material with a rule. Keep the layer even, minimum 10 mm thick, which will ensure effectiveness of the renovation plaster. Maximum thickness of a single layer is 20 mm. Float the plaster slightly, but without surface felting. Depending on the designed aesthetic effect, the surface of ATLAS GOLDEN AGE TR plaster can be finished with appropriately selected renovation surface mortar or paint with ATLAS GOLDEN AGE S-02 silicate paint, or ATLAS GOLDEN AGE N-2 silicone paint. The materials used for finishing the surface must not deteriorate vapour permeability of the renovation plaster. While applied plaster is drying, provide appropriate ventilation of the rooms indoors. Protect plasters applied outdoors from drying too fast.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek doctor’s assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE TR is a factory made dry mix manufactured on the basis of the highest quality cement binder, quartz fillers and improvers. The product conforms to PN-EN 998-1 standard. EC Declaration of Performance No. AZW TR/CPR.

    Mixing proportions: water/dry mix

    4.60 l/25 kg
    Pot life
    ca. 2 hours
    Consumption
    ca. 12 – 14 kg of mortar for 1 m²
    at 10 mm layer thickness
    Min. coat thickness
    10 mm
    Max. coat thickness
    20 mm

    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +30°C
    Available packaging
    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
     

    Factory made plastering mix of specified properties,

    for renovations (R), suitable for indoor and outdoor use

    CE 09
    Reaction to fire - class
    A1
    Adhesion
    ≥ 0.5 N / mm² - FP:B
    Compressive strength
    1.5 – 5.0 N/mm²
    Water absorption
    ≥ 0.3 kg / m² after 24 hours
    Water penetration
    ≤ 5 mm
    Water vapour permeability coefficient μ
    ≤ 15
    Thermal conductivity coefficient
    (average tabular value P=50%)
    0.47 W / mK (λ10,dry)
    Gross dry density
    ≤ 1800 kg/m³
    Durability.
    Mass decrement after freeze-thaw cycles
    < 1%
    Durability.

    Compressive strength decrease after freeze-thaw cycles

    < 10%
    Go top
    ATLAS ZŁOTY WIEK TR
    ATLAS ZŁOTY WIEK TR
    renovation plaster

    Current documentation