piksel
Helpline
ATLAS ZŁOTY WIEK TSG

ATLAS ZŁOTY WIEK TSG

renovation coarse-aggregate finishing coat

ATLAS ZŁOTY WIEK TSG

Product description

Mineral cementitious mortar for execution of the final finishing coat on walls and ceilings.
Recommended for smoothing surfaces of previously applied cement, lime-cement and cement-lime renovation plasters and concrete.
Contains lime – natural binder used for ages at manufacturing construction materials. The lime content decides about elasticity of the coating and its resistance to cracking.

Main properties

    Main parameters

    • granulation up to 1.0 mm
    • consumption: ca. 15 kg / 1 m² / 10 mm layer thickness
    • white
    • coat thickness: 1 - 10 mm
    • waterproof

    USE & PROPERTIES

    Go top

    ·          mineral cementitious mortar for execution of the final finishing coat on walls and ceilings

    ·          granulation up to 1.0 mm – allows achieving surface characteristic for historic plasters

    ·          recommended for smoothing surfaces of previously applied cement, lime-cement and cement-lime renovation plasters and concrete

    ·          based on very high quality white Portland cement

    ·          contains lime – natural binder used for ages at manufacturing construction materials. The lime content decides about elasticity of the coating and its resistance to cracking

    ·          high resistance to micro-cracking – due to the application of special microfibres additionally reinforcing the structure of the material

    ·          broad range of application – the mortar is easily applied both in 1 mm layer and 10 mm layer

    ·          white finish – allows for easy and economical covering the surface with paint

    ·          material developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties

    ·          for indoor and outdoor application

    ·          waterproof

    ·          frost resistant

    SUBSTRATE PREPARATION

    Go top

    The method of surface cleaning must be individually adjusted for each object, depending on the strength and condition of the substrate material and its historic value. The substrate must be sound, free from dust, dirt, efflorescence, remains of painting coats. Hammer off poorly adhering pieces of the surface and remove loose or weak parts with steel brush. Directly before the application of plaster, wet the surface with water.

    APPLICATION

    Go top

    Pour the dry mix from the bag into a clean container with the suitable amount of water (recommended proportions: 7.0 ÷ 8.0 l/25 kg) and mix mechanically until homogenous, lump free and without separating liquid. The mortar is ready to use after ca. 5 minutes and remixing. Apply the mortar in an even layer upon the substrate with a stainless steel float, pressing strongly against the substrate. The surface can be finished by grinding or light float finishing with a felt float. Protect the surface against excessive drying during the application of the material and its setting.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·           The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek doctor’s assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE TSG is a factory made dry mix manufactured on the basis of the highest quality mineral binder (cement and lime), quartz fillers and improvers. The product conforms to PN-EN 998-1 standard. EC Declaration of Performance No. AZW TSG/CPR.

    Mixing proportions: water/dry mix
    7.0 – 8.0 l/25 kg
    Pot life
    ca. 2 hours
    Open time
    ca. 25 minutes
    Consumption
    ca. 15 kg of mortar for 1 m²
    at 10 mm layer thickness
    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +25°C
    Min. / max. coat thickness
    1 mm / 10 mm
    Available packaging
    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
     

    Factory made plastering mix of specified properties,

    single-coat (OC), suitable for indoor and outdoor use

    CE 13
    Reaction to fire - class
    A1
    Adhesion
    ≥ 0.5 N / mm² - FP:B
    Compressive strength
    1.5 – 5.0 N/mm²
    Water absorption
    ≤ 0.4 kg / m² min0,5
    Water filtration examined
    after required ageing cycles [ml/cm² after 48 hours]
    ≤ 1
    Water vapour permeability coefficient μ
    15/35
    Thermal conductivity coefficient
    (average tabular value P=50%)
    0.93 W / mK (λ10,dry)
    Gross dry density
    ≤ 1800 kg/m³
    Durability.
    Mass decrement after freeze-thaw cycles
    < 3%
    Durability.

    Compressive strength decrease after freeze-thaw cycles

    < 10%
    Go top
    ATLAS ZŁOTY WIEK TSG
    ATLAS ZŁOTY WIEK TSG
    renovation coarse-aggregate finishing coat

    Current documentation