piksel
Helpline
ATLAS ZŁOTY WIEK TZK

ATLAS ZŁOTY WIEK TZK

white adhesive mortar with trass

ATLAS ZŁOTY WIEK TZK

Product description

For fixing wall and floor stone, ceramic and mosaic cladding, for indoor and outdoor use, exposed to significant moisture in operation
Based on white hydraulic binder – eliminates the risk of discolouration on the surface of the fixed elements, designed for tiles of high absorption, e.g. marble
Contains trass – mineral of volcanic origin, limiting the possibility of efflorescence occurrence on the surface of fixed facing

Main properties

    Main parameters

    • adhesion: > 1.00 N / mm²
    • consumption: ca. 1.5 kg / 1 m² / 1 mm layer thickness
    • coat thickness - 2 - 10 mm
    • waterproof

    USE & PROPERTIES

    Go top

    ·          for fixing wall and floor stone, ceramic and mosaic cladding, for indoor and outdoor use, exposed to significant moisture in operation

    ·          based on white hydraulic binder – eliminates the risk of discolouration on the surface of the fixed elements, designed for tiles of high absorption, e.g. marble

    ·          contains trass – mineral of volcanic origin, limiting the possibility of efflorescence occurrence on the surface of fixed facing

    ·          very high adhesion to the substrate – the mortar recommended for fixing tiles on difficult, old substrates (degenerated by longtime moisture, salts, biological contamination), can be also used for assembling decorative moulding elements, window frames, trims, stucco elements, etc.

    ·          deformable – absorbs thermal and mechanical strains the facing is exposed to, may be used for fixing cladding exposed to extremely hard operation conditions

    ·          stable on vertical elements, does not slip, enables fixing cladding from top to bottom

    ·          comfortable to use – extended open time up to 30 minutes

    ·          thick adhesion layer (from 2 to 10 mm) – enables fixing cladding without initial substrate leveling and tiles of irregular of profiled bottom surface

    ·          recommended for plinths and other building elements exposed to moisture

    ·          for indoor and outdoor application

    ·          developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties

    ·          waterproof and frost resistant

    SUBSTRATE PREPARATION

    Go top

    The method of surface cleaning must be individually adjusted for each object, depending on the strength and condition of the substrate material and its historic value. The substrate should be cleaned of dust, dirt, patina, loose and dusty elements and residues of grease, oils and wax. Remove the surface biological contamination and impregnate the cleaned substrate. For excessively absorptive substrate use the regulating and absorbability limiting agent.

    APPLICATION

    Go top

    Prepare the mortar by pouring the dry mix into a container with a suitable amount of water (recommended proportions 6.5 – 7.00 liters of water for 25 kg of the dry mix) and mixing mechanically until homogenous, free from lumps and separating liquid. The mortar is ready to use after ca. 5 minutes and remixing. The adhesive should be applied to the surface with a steel notched trowel (notch size 4-12 mm) and with a thin layer on the tile bottom (with the smooth trowel edge). Directly after the adhesive application place the tile, move slightly and press against the substrate. After pressing the adhesion surface should be complete, with no free spaces. The position of a tile can be adjusted for about 10 minutes after it is pressed. Leave the joint between the tiles of thickness proper for the tile edge size. Grouting can start after the adhesive setting, not earlier than 24 hours after fixing the tiles. It is recommended to use Renovation Grouting Mortar with Trass ATLAS GOLDEN AGE FG. Execute the works in temperature from +5 °C up to +25 °C. During the works and after their ending protect the cladding from precipitation and too fast mortar drying.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to building principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions, in above zero temperature (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek doctor’s assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE TZK is factory made dry mix manufactured on the basis of white hydraulic binder with addition of trass flour, fillers and improvers.

    Mixing proportions: water/dry mix
    6.5 – 7.0 l/25 kg
    Pot life
    ca. 4 hours
    Consumption
    ca. 1.5 kg of mortar for 1 m²
    at 1 mm layer thickness
    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +25°C
    Adhesion to substrate
    > 1.00 N / mm²
    Available packaging
    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
    Go top
    ATLAS ZŁOTY WIEK TZK
    ATLAS ZŁOTY WIEK TZK
    white adhesive mortar with trass

    Current documentation