piksel
Helpline
ATLAS ZŁOTY WIEK ZBM-05

ATLAS ZŁOTY WIEK ZBM-05

fine-aggregate mortar for castings

ATLAS ZŁOTY WIEK ZBM-05

Product description

For making castings of architectural details and filling moulding forms.
Material developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties.

Main properties

    Main parameters

    • aggregate grain size: up to 0.5 mm
    • rich colour palette – 112 ready recipes
    • consumption: ca. 1.6 kg of mortar for 1 dm³
    • waterproof

    USE & PROPERTIES

    Go top

    ·          for making castings of architectural details and filling moulding forms

    ·          finished elements can be installed indoors and outdoors

    ·          mineral – based on hydraulic binder

    ·          fine-aggregate - aggregate grain size up to 0.5 mm

    ·          rich colour palette – 112 ready recipes, possibility of mortar dyeing with other colours, depending on individual needs - based on the samples of the original material

    ·          easy to use – the consistency and working parameters enable fast and accurate form filling

    ·          after setting, characterized by low absorptivity, high mechanical parameters and very good frost resistance

    ·          material developed specifically for the needs of renovation of historical buildings – characterized by optimally combined resistance, physical and chemical properties

    ·          waterproof

    ·          frost resistant

    APPLICATION

    Go top

    Pour the dry mix from the bag into a clean container with the suitable amount of water (recommended proportions: 4.5 l/25 kg) and mix mechanically until homogenous, lump free and without separating liquid. Use slow rotating mixer to avoid excessive aeration of the mortar. The mortar is ready to use after ca. 5 minutes and remixing. Pour the prepared mortar slowly and carefully into previously prepared moulds, protected with anti-adhesive agents. Demoulding of the cast elements can take place not earlier than after about 24-48 hours, depending on the size of the casting. The demoulding time depends to a significant degree on the ambient temperature and can be extended in low temperatures. Depending on the needs and the designed aesthetic effect, the castings can be painted with ATLAS GOLDEN AGE S-02 silicate paint or ATLAS GOLDEN AGE N-02 silicone paint, or ATLAS GOLDEN AGE L glazing paint. Apart from painting, hydrophobization of the whole surface with ATLAS GOLDEN AGE SH compound can be applied as prophylactic protection against weather conditions.

    REMARKS

    Go top

    ·          The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

    ·          The tools must be cleaned with clean water directly after use. Difficult to remove residues of the set adhesive can be removed with the ATLAS SZOP agent.

    ·          The shelf life of the product is 12 months from the production date shown on the packaging. The mortar must be transported and stored in tightly sealed bags, in dry conditions (most preferably on pallets).

    ·          Irritant – contains cement. Risk of serious damage to the eyes. Can trigger allergic reaction on contact with skin. Keep out of the reach of children. Do not inhale the dust. Rinse contaminated eyes with large amounts of water and seek medical assistance. Wear appropriate protective clothing, protective gloves and goggles or face protection. In case of ingestion immediately seek medical advice – show the packaging or label.

    TECHNICAL DATA

    Go top

    ATLAS GOLDEN AGE ZBM-05 is a factory made dry mix manufactured on the basis of the highest quality hydraulic binder, fillers and improvers. Inorganic pigments resistant to alkali and UV radiation are used for dyeing the mix.

    Mixing proportions: water/dry mix
    4.5 l/25 kg
    Pot life
    ca. 2 hours
    Open time
    ca. 20 minutes
    Consumption

    ca. 1.6 kg of mortar for 1 dm³

    Total water absorption
    up to 8%
    Mortar preparation temperature,

    substrate and ambient temperature during work

    from +5°C to +30°C
    Max. aggregate grain size
    0.5 mm
    Available packaging

    paper bags of 25 kg

    Content of soluble chromium (VI) in ready-to-use mix

    ≤ 0.0002%
    Go top
    ATLAS ZŁOTY WIEK ZBM-05
    ATLAS ZŁOTY WIEK ZBM-05
    fine-aggregate mortar for castings

    Current documentation