piksel
Helpline
EURO-GRUNT

Product description

Priming Agent EURO-GRUNT is designed for priming absorptive and porous surfaces made of cellular concrete, bricks, ceramic and silicate hollow blocks, chipboards, plasterboards as well as gypsum, cement and cement - lime plasters.

Main properties

  • time of drying - 4-12 hours

Main parameters

  • consumption - 0.1 ÷ 0.3 kg / 1 m²

USE

Go top
Priming Agent EURO-GRUNT is designed for priming absorptive and porous surfaces made of cellular concrete, bricks, ceramic and silicate hollow blocks, chipboards, plasterboards as well as gypsum, cement and cement - lime plasters. It is used for appropriate preparation of substrates prior to application of gypsum plasters and finishing coats, cement plasters and levelling coats, gypsum adhesives and mortars.

PROPERTIES

Go top
Owing to high penetration ability, Priming Agent EURO-GRUNT, penetrates deep into old and dry substrates, therefore makes them stronger and unifies the parametres of the whole surface. It regulates the substrate absorptiveness, improves the setting conditions and bonding of coats applied upon the primed surfaces. Owing to the use of the agent, the applied coats set and dry uniformly, reach expected strength parametres and do not loosen. The agent does not saponify during application and forms transparent, water vapour permeable coat after drying.

SUBSTRATE PREPARATION

Go top
The substrate should be stable and cleaned of impurities which might impair the agent bonding, particularly of dust, dirt, form oils, greases, residues of paint coatings and anti-adhesion agents. Poorly bonded substrate elements should be hacked off, loose dusty fragments additionally cleaned with the use of a card. The substrate should be properly aged and its humidity must not exceed 3%.

AGENT PREPARATION

Go top
Priming Agent EURO-GRUNT is manufactured ready-to-use. It must not be mixed with other materials, thinned or thickened.

APPLICATION

Go top
The agent is applied undiluted with a roller, a paintbrush or sprayed with thin, uniform coats. Application of subsequent coats can commence when the primed surface dries, i.e. after 4-12 hours since agent application.

CONSUMPTION

Go top
The average consumption is approx. 0.1-0.3 kg per 1 m². Actual consumption depends on the substrate absorptiveness.

PACKAGES

Go top
Plastic containers 1 kg, 5 kg.
Pallet: 432 kg in 1 kg containers, 540 kg in 5 kg containers.

STORAGE AND TRANSPORT

Go top
Keep in tightly sealed original and labelled packages. Keep in dry and cool place, protect against high temperature (above +30°C) and freezing – product freezes and irreversibly loses performance in temperature below 0°C. Protect against direct sunlight. Shelf life is 12 months from the production date given on the package.

TECHNICAL DATA

Go top
Content of non-volatile substances:
≥ 10%
Time of drying:
4-12 h
Temperature of substrate and air:
from +5 °C to +25 °C
Maximum allowable content of VOC:
30 g/l
Maximum content of VOC in the product:
2.13 g/l
 
The product has been given the hygiene certificate no. HK/B/0183/01/2015 issued by the Polish National Institute of Hygiene.
 
NOTE
Keep out of the reach of children. After agent use, ventilate room until specific odour disappears.
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to building principles and OHS regulations. At the time of publication of this product data sheet all previous ones become void.
Go top
EURO-GRUNT
EURO-GRUNT
priming agent

Current documentation