piksel
Helpline
INTER-GRUNT

Product description

INTER-GRUNT is a general-use priming agent for substrates of any type. It is particularly recommended for smooth substrates of high density and low absorptiveness, e.g. walls, ceilings and other construction elements made of on-site made or prefabricated concrete.

Main properties

  • time of drying - approx. 24 h

Main parameters

  • consumption - 0.2 ÷ 0.4 kg / 1 m²

USE

Go top
INTER-GRUNT is a general-use priming agent for substrates of any type. It is particularly recommended for smooth substrates of high density and low absorptiveness, e.g. walls, ceilings and other construction elements made of on-site made or prefabricated concrete. Can also be used upon cement, cement-lime, gypsum and gypsum-lime plasters as well as plasterboards. The agent is used for proper preparation of substrates prior to application of gypsum plasters and finishing coats, cement plasters and levelling mortars, thin-coat decorative renders, gypsum adhesives and mortars.

PROPERTIES

Go top
Priming Agent INTER-GRUNT is ready-to-use, manufactured on the basis of dispersion of synthetic resins with addition of quartz sand of high resistance to alkali action. The content of aggregate makes the coated surface appropriately rough, therefore facilitates proper application of subsequent coats and improves their bonding to the substrate. After drying, the coat keeps maroon colour.

SUBSTRATE PREPARATION

Go top
The substrate should be stable and cleaned of impurities which might impair the agent bonding, particularly of dust, dirt, form oils, greases, residues of paint coatings and anti-adhesion agents. Poorly bonded substrate elements should be hacked off, loose dusty fragments additionally cleaned with the use of a card. The substrate should be properly aged and its humidity must not exceed 3%.

AGENT PREPARATION

Go top
Priming Agent INTER-GRUNT is manufactured ready-to-use. It must not be mixed with other materials, thinned or thickened. After opening the container, mix the content in order to unify the consistency.

APPLICATION

Go top
The agent is applied with a roller, a paintbrush or sprayed with uniform coats. Application of subsequent coats can commence when the primed surface dries, i.e. after 24 hours since agent application.

CONSUMPTION

Go top
The average consumption is approx. 0.2-0.4 kg per 1 m².

PACKAGES

Go top
Plastic containers 20 kg.
Pallet: 320 kg in 20 kg containers.

STORAGE AND TRANSPORT

Go top
Keep in tightly sealed original and labelled packages. Keep in dry and cool place, protect against high temperature (above +30°C) and freezing – product freezes and irreversibly loses performance in temperature below 0°C. Protect against direct sunlight. Shelf life is 12 months from the production date given on the package. Incoherence with recommendations listed above may impact the product working parameters.

TECHNICAL DATA

Go top
Density:
1.7 g/cm³
Time of drying:
approx. 24 h
Temperature of substrate and air:
from +5 °C to +25 °C
 
The product has been given the hygiene certificate no. HK/B/0010/01/2016 issued by the Polish National Institute of Hygiene and the Radiation Hygiene Certificate no. HR/B/5/2011.
 
NOTE
Keep out of the reach of children. Do not leave the containers open.
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to building principles and OHS regulations. At the time of publication of this product data sheet all previous ones become void.