The system is designed for installation of the external wall insulation of buildings - it may be used both on the rendered/plastered façades and rough walls made of bricks and blocks (ceramic, cement-lime, stone, of aerated concrete and
concrete - monolithic or precast).
For thermal insulation with the use of mineral wool - both the façade panels (of thickness 50 - 250 mm) and the lamella panels (of thickness 20 - 250 mm).
For thermal insulation of buildings irrespectively of their height - especially for high buildings and skyscrapers (above 25 m).
Recommended for thermal insulation works in the traditional constructions, energy- saving and passive ones - due to non - flammability the system is recommended for thermal insulation of public access buildings, schools, hospitals, etc.
Insulation fixing – Basic
AVAL KT 190 - adhesive for mineral wool
Mineral wool panels (MW) with the codes:
Standard wool: T4 or T5 (thickness); DS(TH); WS, WL(P), TR10 or TR15, CS(10)40 or CS(10,Y)50
Lamella wool: T5 (thickness); DS(TH); WS, WL(P), TR80 or TR100, CS(10)30 or CS(10)40
Insulation fixing – additional*)
WKRĘT-MET: ŁMX 8, ŁTX 8, ŁMX 10, ŁTX 10
EJOT: ejotherm STR U, SDK-U, NT U, NK U, SDM-T plus U
Fischer: TERMOZ 8N, 8NZ, PN8
KOELNER: TFIX-8M, KI-10N
MKaM-Łi3A 10, MKaM-Łi3A 10 Mt
BRAVOLL PTH-S 60/8-La, BRAVOLL PTH-SL 60/8-La
AVAL KT 190 adhesive mortar with fiberglass mesh: SSA-1363-SM 05 or AKE 145
Outer (finishing) layer
AVAL KT 35 or AVAL KT 137 thin-coat mineral render + AVAL KT 16 priming mass
AVAL KT 72 thin-coat silicate render + AVAL KT 15 priming mass
AVAL KT 74 thin-coat silicone render + AVAL KT 76 priming mass
AVAL KT 52 silicate façade paint + AVAL KT 54 primer
AVAL KT 48 silicone façade paint + AVAL KT 47 primer
AVAL KT 46 hybrid façade paint
Carry out the work in dry weather, at the substrate and ambient temperature not lower than +5 °C and not higher than +30 °C. The façade should be on time of thermal insulation work protected and secured against precipitation, strong wind and direct sunlight - it is recommended to use fine mesh scaffolding covers. Insulation works should be carried out in dry conditions (no precipitation, relative humidity below 80%).
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void.
Date of update: 2013-07-01