The system is designed for installation of the external wall insulation of buildings - it may be used both on the rendered/plastered façades and rough walls made of bricks and blocks (ceramic, cement-lime, stone, of aerated concrete and concrete - monolithic or precast).
For thermal insulation with the use of extruded polystyrene (XPS) - the thermal insulation thickness is from 20 up to 200 mm.
Recommended on plinths, foundation and cellar walls - due to the nature and type of insulation material, the system can be also used on gable walls, attics, at the building entrances.
It can be fixed to the surfaces of horizontal or inclined building elements – provided that they are not directly exposed to weather conditions.
Recommended for thermal insulation works in the traditional constructions, energy- saving and passive ones.
Insulation fixing – Basic
ATLAS STOPTER K-10 adhesive mortar
ATLAS STOPTER K-20 adhesive mortar
ATLAS HOTER S adhesive mortar
ATLAS HOTER U adhesive mortar
XPS panels with the codes:
Insulation fixing – additional*)
WKRĘT-MET: ŁIT, ŁIM, ŁFM8, ŁFN8, ŁFM10, ŁFN10
EJOT: ejotherm ST U, STR U, SDM-T plus U, NT U
Fischer: TERMOZ 8N, 8U
Hilti: SD-FV, SX-FV
ATLAS STOPTER K-20 or ATLAS HOTER U adhesive mortar with fiberglass mesh: SSA-1363-SM 05 or AKE 145
Outer (finishing) layer
ATLAS CERMIT thin-coat render (mineral or acrylic) + ATLAS CERPLAST priming mass
ATLAS SILKAT thin-coat render + ATLAS SILKAT ASX priming mass
ATLAS SILKON thin-coat render + ATLAS SILKON ANX priming mass
ATLAS ARKOL E façade paint
ATLAS ARKOL S façade paint + ARKOL SX primer
ATLAS ARKOL N façade paint + ARKOL NX primer
ATLAS FASTEL NOVA façade paint
- European Technical Approval ETA No. ETA-07/0316. Declaration of Performance No.003/CPR. EC Certificate of Conformity No. 1488-CPD-0075.
- NSAI Certificate No. 10/0347 (for Ireland).
Carry out the work in dry weather, at the substrate and ambient temperature not lower than +5 °C and not higher than +30 °C. The only exception is the ATLAS STOPTER K-20 adhesive, which can also be used at 0 ° C, assuming that after 8 hours from the work completion the temperature does not drop below -5 ° C. The facade should be on time of thermal insulation work protected and secured against precipitation, strong wind and direct sunlight - it is recommended to use fine mesh scaffolding covers. Insulation works should be carried out in dry conditions (no precipitation, relative humidity below 80%).
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void.
Date of update: 2013-07-01