piksel
Helpline
ATLAS IMPREGNATING SEALER FOR ARCHITECTURAL CONCRETE

ATLAS IMPREGNATING SEALER FOR ARCHITECTURAL CONCRETE

agent for reduction of absorptiveness

ATLAS IMPREGNATING SEALER FOR ARCHITECTURAL CONCRETE
P1  na ściany P1 na ściany
P2  na podłogi P2 na podłogi
P3  do wewnątrz P3 do wewnątrz
P4  na zewnątrz P4 na zewnątrz
N9  wałek N9 wałek

Product description

Reduces absorptivity of surfaces made of ATLAS CERMIT BA-M - mineral render of texture of architectural concrete.
Prevents salt efflorescence and discolouration on the surface of ATLAS CERMIT BA-M render.
Protects ATLAS CERMIT BA-M rendering coat against colour change resulting from rainfall.

Main properties

    - for surfaces made of ATLAS CERMIT BA-M render - improves surface hydrophobicity, enables surface self-cleaning during rainfall - decreases superficial absorptivity, protects surface against efflorescence and discolouration

Main parameters

    Temperature of application: from +5 °C up to +30 °C Impregnation: after approx. 3 days* since render application Time of drying: approx. 1 hour (depending on ambient temperature and humidity)

PROPERTIES

Go top
Hydrophobizing action - reduces surface absorptivity and protects construction elements against excessive soaking.
 
Oleophobic action – protects surface against greases and oils. Forms barrier protecting from penetration of technical oils and tar.
 
Long-term façade protection against dampness and dirt. Prevents from stains e.g. coffee, grease, mineral and synthetic oils – soiled surface should be cleaned as quick as possible, as the final effect depends on the time when the stains stay in contact with the substrate.
 
Slightly highlights colour of the impregnated surface, forms natural effect of architectural concrete.

USE

Go top
 
Prevents salt efflorescence and discolouration on the surface of ATLAS CERMIT BA-M render.
 
Protects ATLAS CERMIT BA-M rendering coat against colour change resulting from rainfall.

TECHNICAL DATA

Go top
Temperature of application (substrate and ambient temperature)
from +5 °C up to +30 °C
Impregnation
after approx. 3 days* since render application
Time of drying
approx. 1 hour*
*depending on ambient temperature and humidity
 
ATLAS IMPREGNATING SEALER FOR ARCHITECTURAL CONCRETE – maximum VOC concentration in the product below 29,9 g/l. Maximum allowable VOC concentration 30g/l.

TECHNICAL REQUIREMENTS

Go top
Impregnating sealer is not considered as a construction product.

IMPREGNATION

Go top
Impregnating sealer should be shaken in the packaging before use and uniformly applied undiluted upon the substrate with a painting roller and distributed in various directions. Avoid forming smudges and leakages. In order to ensure desired hydrophobizing effect and uniform surface colour, the product should be applied in two coats. The second coat of the agent can be applied when the first coat completely dries, after approx. 1 hour. 

CONSUMPTION

Go top
Average consumption for two coats of impregnating sealer is 0.2 l for 1 m2 of render.

PACKAGING

Go top
Plastic bottle 1 l.

IMPORTANT ADDITIONAL INFORMATION

Go top
Impregnated surface should be protected both during application and agent drying against direct sunlight, wind and precipitations (surface should be protected for min. 24 hours since application of the latest layer of the impregnating sealer).
 
Tools should be cleaned with clean water, directly after use.
 
Keep out of reach of the children. Contains mixture of 5-chloride-2-methyl-2H-isothiasol-3-one [EC-247-500-7] and 2-methyl-2H-isothiasol-3-one [EC 220-239-6] (3:1). May cause an allergic reaction. Proceed in accordance with the Safety Data Sheet.
 
Impregnating sealer should be transported and stored in cool, dry, well ventilated room in properly labelled and tightly sealed original container. Avoid direct sunlight, heat sources, hot surfaces and open fire. Storage temperature: from +5⁰C up to +30⁰C. Protect from freezing. Product should be stirred before use. While maintaining conditions above, no adverse reactions known. Shelf life in conditions compliant with the requirements above is 12 month from the manufacturing date shown on the packaging.
 
The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.
At the time of publication of this product data sheet all previous ones become void. An up-to-date technical product documentation is available at www.atlas.com.pl/en
Date of update: 2019-02-14
Go top
ATLAS IMPREGNATING SEALER FOR ARCHITECTURAL CONCRETE
ATLAS IMPREGNATING SEALER FOR ARCHITECTURAL CONCRETE
agent for reduction of absorptiveness

Current documentation