ATLAS KB-15

masonry mortar for cellular concrete

for walls made of cellular and aerated concrete
for blocks, bricks, hollow blocks
prevents thermal bridging
compressive strength – category M5

Product description

ATLAS KB-15 is recommended for constructing walls of cellular and aerated concrete.

• Prevents thermal bridging – provides uniform thermal insulation parameters of the whole partition.

• Used for thin joint masonry – recommended layer thickness from 2 to 10 mm (optimum thickness: 2-3 mm).

• Type of masonry – cellular concrete (aerated concrete), but also bricks, hollow blocks and other such ceramic, lime sand and concrete materials.

Properties

ATLAS KB-15 is produced as a dry mixture of cement binder, aggregates and modifying agents.

Compressive strength – category M5.

Easy and convenient to use – characterised by very good workability, plasticity and high adhesion.

High performance – the ability to control layer thickness when applied with a notched trowel or dispenser reduces mortar consumption and speeds up the work.

So called anti-freezing agents may be added to mortar allowing works in lower temperatures, i.e. below +5°C – the new temperature range of mortar application, method of its preparation (especially the correction of the amount of added water), principles of works and mortar setting conditions should be adopted according to the additive indications of the manufacturer; the amount of the added anti-freezing agent depends on the cement content in the mortar – the ratio of cement:fillers in ATLAS KB-15 mortar is 1:2. Note. The mortar manufacturer is not responsible for the effects and quality of the anti-frost additives used.