Most important features
- for porcelain, glazed tiles and terracotta
- allows tiles to be applied "from the top down"
- layer thickness 2-10 mm
- for indoor and outdoor use
ATLAS ATUT
adhesive for tiles C1T (2-10 mm)
Product description
ATLAS ATUT is a general-use C1T adhesive for tiles for simple tiling works on standard substrates. Wide range of bed depth 2-10 mm allows for cladding fixing on uneven surfaces and for levelling of mineral surfaces. It can be successfully used for local tile replacement.
Main properties
- ATLAS ATUT is produced as a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents.
Thanks to its improved formulation, the product provides:
- wide range of adhesive layer thicknesses (2-10 mm), and therefore allows thin-layer adhesion of the cladding even on uneven substrates and makes it possible to level mineral substrates,
- decreased run-off - making it possible to install ceramics "from the top down" and avoids cutting tiles on the exposed wall surface.
Main parameters
- thickness of the applied layer: 2 - 10 mm
- application temperature: from +5 ° C to +25 ° C
- pot time: approx. 4 hours
- grouting: after 24 hours
Technical data
Go top|
Properties |
Value |
|
Mixing ratio (water/dry mix) |
0.21 – 0.24 l / 1 kg |
|
Min. /max. adhesive thickness |
2 mm / 10 mm |
|
Pot life |
approx. 4 hours |
|
Open time |
min. 20 minutes |
|
Walk on/grout |
after approx. 3 days |
x
