Most important features
- perfectly imitates exposed concrete
- freedom of colour and texture design
- highly UV- and water-resistant
- resistant to soiling
- can be applied in wet areas and on ceramic tiles
New
ATLAS SILKON BA
concrete texture silicone render
New
Product description
ATLAS SILKON BA is used for making surfaces imitating the texture of concrete and the structure of trowelled render – it creates a durable and decorative finish on the façade surface. It may be applied on the whole façade surface, in the form of bossage or on fragments of the façade.
It can be used as an interior render, including in showers.
ATLAS SILKON BA is intended to be used as decorative and protective thin-coat rendering:
• in complex external thermal insulation cladding systems using polystyrene (EPS) boards,
• on even, properly prepared mineral substrates (e.g.: concrete, traditional cement and cement-lime renders),
• on old ceramic tiles after prior priming with ATLAS ULTRAGRUNT provided a good adhesion of the tiles to the substrate.
Packaging:
Bucket 20 kg.
Main properties
- ATLAS SILKON BA is a ready-to-use silicone render based on a mixture of new generation silicone and acrylic resins, surface hydrophobic agents, mineral fillers, special modifying additives and carefully selected pigments. It is fibre-reinforced.
- High UV and rain resistance of the façade - thanks to the combination of silicone and acrylic dispersions and hydrophobic agents, the render is highly resistant to all kinds of weather conditions.
- No impregnation required - the façade surface has the ability to self-clean and prevents: - the penetration of dirt into the structure of the render, - the development of biological infestation, e.g. in the form of algae, - the formation of surface soiling.
- The surface of the render has a very low absorbency, and the hydrophobic layer as well as the high-density fillers effectively reduce the structural absorbency of the render.
- Can be used in wet areas, e.g. in showers – even on old ceramic tiling.
- Freedom of colour and texture design - the silicone render ATLAS SILKON BA can be modelled to create any effect, e.g.: - the effect of exposed concrete with lots of pitting, - the effect of monolithic concrete, - the effect of grooved slabs, - the effect of smooth slabs.
- The render is available in 9 recommended colours – it can be made to order in any other shade.
- The recommended render colours are durable and do not change over time – thanks to the use of appropriately selected inorganic and organic pigments.
- High elasticity – the high content of acrylic resins ensures the transfer of considerable thermal and mechanical stresses, which, among other things, makes it possible to create façade surfaces also in dark colours.
Main parameters
- Application of the second layer: after approx. 2 hours
- Aggregate thickness: up to 1.2 mm Consumption: The exact consumption can be determined by means of a test application on the relevant substrate. The average consumption is 2.5 kg render per 1 m2.
x
