piksel
Helpline

repair mortars

ATLAS ZW 330 ATLAS ZW 330
fast setting leveling mortar
  • high bonding and compressive strength
  • reinforced with polypropylene fibres
  • plastic consistency
  • under tiles, finishing coats, plasters, screeds
  • tiling just after a few hours
ATLAS TEN-10 ATLAS TEN-10
fast setting cement mortar
    - for repairs of concrete and ferroconcrete substrates - for execution of floors exposed to high loads - rapid strength build-up, limited contraction - foot traffic already after 3 hours - strong bonding to ceilings
ATLAS MONTER T-5 ATLAS MONTER T-5
fast setting assembly mortar
  • for anchoring of construction elements
  • beginning of setting just after 5 minutes
  • compressive strength after 1 hour not less than 10.0 MPa
  • blocks local water leakages
  • for non-structural repairs of concrete and ferroconcrete elements (mortar with addition of sand)
ATLAS MONTER T-15 ATLAS MONTER T-15
fast setting assembly mortar
  • for anchoring construction elements
  • does not cause corrosion of steel elements
  • strong adhesion to substrate
  • grout under machines and equipment
  • rapid strength build-up
ATLAS ADHER S ATLAS ADHER S
contact coat for concrete repairs
  • high bonding to substrates
  • contact coat for application underneath ATLAS screeds
  • high content of corrosion inhibitors
  • long-term reinforcement protection
  • high bonding to concrete and steel
ATLAS FILER S ATLAS FILER S
repair mortar for concrete, thickness 10-50 mm
  • designed for repairs of single- and multilayer concrete or ferroconcrete substrates
  • very high compressive strength, min. 60 MPa
  • next layer of ATLAS FILER S applicable after 4 hours
  • finishing coat application after 24 hours
  • for manual and machine application
ATLAS ENDER S ATLAS ENDER S
finishing coat for concrete repairs, thickness 3-10 mm
  • fine-aggregate
  • designed for leveling concrete and ferroconcrete surfaces
  • for filling cavities in prefabricated elements
  • does not require application of contact coat
  • for manual and machine application
  • finishing coat applicable after 24 h