BUILDING MORTARS
ATLAS KB-15
masonry mortar for cellular concrete
- for walls made of cellular and aerated concrete
- for blocks, bricks, hollow blocks
- prevents thermal bridging
- compressive strength – category M5
ATLAS MASONRY MORTAR
traditional masonry mortar
- for ceramic, concrete and silicate elements
- for joints 6-40 mm thick
- high plasticity
- compressive strength – category M5
- joins elements into stable, durable wall
ATLAS MASONRY MORTAR FOR CLINKER
contains trass
- does not cause salt efflorescence
- does not contaminate brick surfaces
- based on filtered aggregate
- for bricklaying and pointing
ATLAS MASONRY MORTAR M10
traditional masonry mortar
- for ceramic, concrete and silicate elements
- high ductility
- compressive strength - min. 10.0 N/mm²
- combines elements into a stable, durable wall
ATLAS ADHER S
contact coat for concrete repairs
- very high adhesion to concrete and steel
- bonding layer for ATLAS cement-based floor underlays
- high content of corrosion inhibitors
ATLAS ENDER S
finishing coat for concrete repairs, thickness 3-10 mm
- super smooth, for the final surface finish
- for levelling concrete and reinforced concrete surfaces
- for filling cavities and caves on prefabricated elements
ATLAS EPO-S
universal epoxy binder
- Pedestrian traffic: after approx. 16 hours
- Compressive strength: minimum 50 MPa
- Flexular strength: minimum 15 MPa
- Adhesion to concrete: approx. 3 MPa
- Mechanical loading: after approx. 3 days
ATLAS FILER S
repair mortar for concrete, thickness 10-50 mm
- compressive strength 60 MPa
- possibility to apply another coat of ATLAS FILER S already after 4 hours
- application of the finishing repair putty ATLAS ENDER S already after 24 hours
ATLAS REKORD
white cement top finish
- based on white cement
- for finishing walls and ceilings
- on typical mineral substrates
- contains fine aggregate – up to 0.2 mm
- reinforced microfibers
ATLAS MONTER T-5
fast setting assembly mortar
- firmly fixed after 5 minutes
- for fixing steel and plastic parts
- 10 MPa strength after 1 hour
- for sealing point water leaks
ATLAS PLASTERING MIX
traditional cement plaster, category III
- for plastering of walls made of ceramic, silicate brick, cellular concrete, concrete hollow blocks
- increased bonding
- plasticized, easy to apply
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS ZW 330
rapid-set levelling mortar
- LEVELS→REPAIRS→FILLS
- for levelling walls and floors and for shaping slopes
- for quick repairs and filling of renders, screeds, walls
- high mechanical strength C25 F5
- tiles can be laid after 8 hours
- structural reinforcement with 3D fibres
- polymer enhanced formula
ATLAS PLASTERING MORTAR M
for mechanical plastering
- for mechanical application of traditional cement plaster in category 0-III
- high ductility
- increased adhesion to the substrate
- layer thickness 6-30 mm
- plastering of walls and ceilings