ATLAS ELASTYK
highly flexible adhesive 2-10 mm (C2TE type)
- for ceramic tiles, including mosaic, glazed, stoneware and clinker tiles
- for stone tiles
- for underfloor heating, plasterboard, waterproofing and balconies etc.
- fixing tiles from the top of the wall
- high adhesion
Product description
Product description
ATLAS ELASTYK is a grey, general-use adhesive for tiles C2TE for interior and exterior application on wall and floor.
ATLAS ELASTYK adhesive is a traditional cement adhesive with increased adhesion, for use in the installation of various types of ceramic, stone and glass cladding. The ATLAS ELASTYK adhesive formulation provides:
• wide area of application – thanks to the use of binding addi-tives, ATLAS ELASTYK adhesive has high adhesion to various types of tiles (including large format) and substrates,
• easy and quick application – by extending the open time and reducing run-off, tiling work can be carried out more efficiently,
• durability of application – due to its elastic properties, it shows increased resistance to thermal and mechanical loads (e.g. with underfloor heating, wall heating, plasterboard, flexible water-proofing of the WODER type).
ATLAS ELASTYK adhesive is a traditional cement adhesive with increased adhesion, for use in the installation of various types of ceramic, stone and glass cladding. The ATLAS ELASTYK adhesive formulation provides:
• wide area of application – thanks to the use of binding addi-tives, ATLAS ELASTYK adhesive has high adhesion to various types of tiles (including large format) and substrates,
• easy and quick application – by extending the open time and reducing run-off, tiling work can be carried out more efficiently,
• durability of application – due to its elastic properties, it shows increased resistance to thermal and mechanical loads (e.g. with underfloor heating, wall heating, plasterboard, flexible water-proofing of the WODER type).
Properties
Properties
ATLAS ELASTYK is produced as a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents.
Enhanced adhesion – minimum adhesion to the substrate is 1.0 N/mm².
Even easier application – the adhesive is easier to mix and apply, and does not run off the trowel.
The adhesive layer thickness range (2-10 mm) allows:
– thin-bedding of cladding on an even substrate,
– thin-bedding of coverings on uneven substrates, preceded by levelling mudding.
Extended open time – allows the adhesive to be applied to the tile for up to 30 minutes after it is applied to the substrate – can be applied to a larger area at a time and therefore minimises working time.
Reduced run-off – allows tiles to be fixed from above – the correct consistency and layer thickness eliminate adhesive run-off. This makes it possible to start work from the top of the wall and avoid fixing cut tiles on its exposed surface.
Enhanced adhesion – minimum adhesion to the substrate is 1.0 N/mm².
Even easier application – the adhesive is easier to mix and apply, and does not run off the trowel.
The adhesive layer thickness range (2-10 mm) allows:
– thin-bedding of cladding on an even substrate,
– thin-bedding of coverings on uneven substrates, preceded by levelling mudding.
Extended open time – allows the adhesive to be applied to the tile for up to 30 minutes after it is applied to the substrate – can be applied to a larger area at a time and therefore minimises working time.
Reduced run-off – allows tiles to be fixed from above – the correct consistency and layer thickness eliminate adhesive run-off. This makes it possible to start work from the top of the wall and avoid fixing cut tiles on its exposed surface.
Technical documentation
Technical documentation
Here you will find product-related documents and other files for download:
