ATLAS POSTAR 80
fast setting cement floor (10-80 mm)
- fast drying – fixing the cladding after 3 hours
- fast setting – foot traffic after 3 hours
- excellent cohesion, under tiles, parquets and epoxy floors
- limited linear shrinkage
Product description
Product description
ATLAS POSTAR 80 manufactured as a dry mix of Portland cement, quartz fillers and modifiers.
• Forms screed or floor 10 – 80 mm thick – layer thickness depends on the expected structural arrangement (see table below).
• Recommended for quick repairs – fast setting – rapidly reaches the operational parameters, therefore the technological breaks are shorter and application of subsequent layers quicker: foot traffic and fixing the tiles just after 3 hours.
• Can form screed for top flooring layers, e.g. parquet, epoxy floors and coats – characterised by high cohesion and resistance to setting forces, which occur within the joint with flooring layer, e.g. during expansion and contraction of wood resulting from the changes of humidity.
• Forms floor characterised by high abrasion resistance – recommended for residential housing, warehouses, industrial premises, on driveways, terraces, etc.
• Can be installed as screed with heating system – does not require elastifying admixtures, conducts heat well.
• Enables forming a slope and repairs of concrete surfaces, stairs, slabs, floors.
Types of possible arrangements:
• bonded – thickness 10 – 80 mm
• on separation layer – thickness 35 – 80 mm
• floating – thickness 40 – 80 mm
• heating – the layer above the heating layer should be min. 35 mm thick.
Packaging:
Paper bags 25 kg.
• Forms screed or floor 10 – 80 mm thick – layer thickness depends on the expected structural arrangement (see table below).
• Recommended for quick repairs – fast setting – rapidly reaches the operational parameters, therefore the technological breaks are shorter and application of subsequent layers quicker: foot traffic and fixing the tiles just after 3 hours.
• Can form screed for top flooring layers, e.g. parquet, epoxy floors and coats – characterised by high cohesion and resistance to setting forces, which occur within the joint with flooring layer, e.g. during expansion and contraction of wood resulting from the changes of humidity.
• Forms floor characterised by high abrasion resistance – recommended for residential housing, warehouses, industrial premises, on driveways, terraces, etc.
• Can be installed as screed with heating system – does not require elastifying admixtures, conducts heat well.
• Enables forming a slope and repairs of concrete surfaces, stairs, slabs, floors.
Types of possible arrangements:
• bonded – thickness 10 – 80 mm
• on separation layer – thickness 35 – 80 mm
• floating – thickness 40 – 80 mm
• heating – the layer above the heating layer should be min. 35 mm thick.
Packaging:
Paper bags 25 kg.
Properties
Properties
- Thick-plastic – mortar consistency makes it easy to spread, float and to form even surface.
- Compressive strength: ≥ 40.0 N/mm² – recommended for any surfaces exposed to medium and high load.
- Flexural strength: ≥ 7.0 N/mm².
- Abrasion resistance: ≤9.0 cm³/50 cm² .
- Low linear shrinkage – minimum changes in linear dimensions during screed drying (approx. 0.6 mm/rm) limit the risk of cracking.
Technical documentation
Technical documentation
Here you will find product-related documents and other files for download:
