ATLAS SAM 200
self-leveling screed
- anhydrite-gypsum based
- almost contractionless – no need of expansion joints for up to 50 m²
- adjustable applied mass consistency
- conducts heat well – perfect for floor heating
- self-leveling – facilitates application
Product description
Product description
Levels surfaces within 25 – 60 mm thickness range – both when substrate has only local irregularities and when it is whole executed with slight slope.
Elevates floor level in the whole room – e.g. when necessary to equalize the level of two adjacent rooms.
Perfect for installation of electric or water floor heating system – very good heat conductivity, better than offered by cement-based products; tightly covers heating installation.
For leveling surfaces of existing screeds with heating systems.
Element of the acoustic insulation system for ceilings – in combination with elasticized polystyrene, ATLAS EXPANSION JOINT PROFILES and polyethylene foil.
Can be used in dry rooms – as the screed based on high quality anhydrite, it can only be used indoors in dry rooms: in living rooms, hallways, halls, salons, offices, corridors, waiting rooms, etc.
Elevates floor level in the whole room – e.g. when necessary to equalize the level of two adjacent rooms.
Perfect for installation of electric or water floor heating system – very good heat conductivity, better than offered by cement-based products; tightly covers heating installation.
For leveling surfaces of existing screeds with heating systems.
Element of the acoustic insulation system for ceilings – in combination with elasticized polystyrene, ATLAS EXPANSION JOINT PROFILES and polyethylene foil.
Can be used in dry rooms – as the screed based on high quality anhydrite, it can only be used indoors in dry rooms: in living rooms, hallways, halls, salons, offices, corridors, waiting rooms, etc.
Properties
Properties
- Self-spreading – enables execution of smooth horizontal surfaces even in large rooms, with no use of battens and mass raking up with a darby.
- Compressive strength ≥ 16.0 N/mm².
- Flexural strength ≥ 5.0 N/mm².
- Low contraction – reduced to minimum possibility of shrinkage cracks during setting, which enables application on areas up to 50 m² large without expansion joints.
- Suitable for manual and machine application – can be easily and quickly applied both manually and with machines equipped with helical pumps, therefore high efficiency is reached.
Technical documentation
Technical documentation
Here you will find product-related documents and other files for download:
