Products
ATLAS PLASTERING MORTAR M
for mechanical plastering
- for mechanical application of traditional cement plaster in category 0-III
- high ductility
- increased adhesion to the substrate
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS SALTA
silicone facade paint
- outstanding colour durability
- well coating
- highly resistant to soiling
- no primer required
- low absorptiveness
ATLAS SALTA E
façade acrylic paint
- excellent coverage and efficiency
- rich colour palette
- self-cleaning
ATLAS SALTA N
façade silicone paint
- for the renovation of old building facades
- façade self-cleaning ability
- low absorptiveness
- no primer required
ATLAS SALTA N PLUS
silicone facade paint
- outstanding self-cleaning ability
- superhydrophobic and vapour-permeable
- UV and weather resistant
- does not discolour when exposed to moisture
- no primer required
ATLAS SALTA S
façade silicate paint
- water repellent
- perfectly vapour-permeable
- ensures long-term durability and protection of the facade
- for painting fresh mineral renders
ATLAS SAM 100
fast setting, self-leveling screed
- anhydrite-gypsum based
- high compressive strength ≥ 35.0 N/mm²
- resistant to concentrated load
- almost no contraction – no need of expansion joints for up to 50 m²
- under tiles, carpet flooring, parquet, panels
ATLAS SAM 200
self-leveling screed
- anhydrite-gypsum based
- almost contractionless – no need of expansion joints for up to 50 m²
- adjustable applied mass consistency
- conducts heat well – perfect for floor heating
- self-leveling – facilitates application
ATLAS ELASTIC SANITARY SILICONE
sanitary silicone (4-25 mm)
- stain resistant, easy to keep clean
- for filling of expansion joints
- for filling of joints between various materials
- durable, elastic and tight filling
- available in 39 colours, compliant with colours of ATLAS grouts
ATLAS SANITARY SILICONE SILTON S
sanitary silicone (4-25 mm)
- for sealing various types of joints and connections
- flexible
- weather-resistant
ATLAS SMS 15
rapid-set, self-levelling compound
- pedestrian traffic after just 3 hours
- tiling just after 8 hours
- under tiles, panels, carpets, parquet, epoxy resin flooring
- low linear shrinkage
- for leveling heating screeds
ATLAS SMS 30
Rapid-set, self-levelling screed
- foot traffic just after 3 hours
- tiling just after 18 hours
- underneath tiles, panels, carpet, parquet
- low linear contraction
- for leveling heating screeds
New
ATLAS SMS 60 ULTRA
cement-based self-levelling floor screed with the gel technology
- for levelling old substrates in a layer of 3 - 60 mm
- for making self-levelling floating screeds with a thickness of 30 – 60 mm
- it can be used for making of heating screeds from 25 mm above the heating system (below the standard thickness),
- as substrate for tiles, laminate flooring, fitted carpets, parquet floors and floorboards
- can be used as a final layer - floor
- foot traffic after only 2 hours
- ready for tiling after only 16 hours
- very smooth surface
UNCOUPLING MAT ATLAS T 100
- allows ceramic cladding to be laid without the need for mapping of substrate expansion joints
- allows for an independent expansion joint system
- allows large-format tiles to be installed without moving the threshold expansion joints
- for laying ceramic tiles on contaminated substrates with reduced adhesion
- significantly speeds up the installation of new ceramic coverings in a single room when the substrate is made up of different types of flooring
- makes it possible to create a uniform ceramic floor on adjacent subfloors with strongly varying thermal loads (e.g. with and without underfloor heating, highly sunny floor sections)
