Products
FAÇADE PROFILES FOR EXTERNAL WALL INSULATION
- protection of façade corners
- installation of expansion joints of external thermal insulation
- resistant to weather conditions
- resistant to mechanical damage
- easy and quick in use
DOLINA NIDY FILLING GYPSUM F
for grouting with the use of reinforcing tape
- elasticized with polymers
- very good grip
- high efficiency and flexibility
- suitable for repair work
- layer thickness up to 10 mm
DOLINA NIDY FILLING GYPSUM
for finishing plaster and all renovation and assembly works inside buildings
- for substrate levelling and all renovation and in-stallation work
- ideal coverage of substrate irregularities
- excellent distribution of the substrate, irrespec-tive of the consistency of the mix
- high durability
New
ATLAS GO! Start & Finish
skim coat
- 2-in-1 – for simultaneous filling and levelling
- for levelling substrates, repairing defects and cracks, and fixing corners
- high strength and hardness
- high resistance to softening
- increased resistance to scratches and damage
- excellent workability and ease of application, no slump
- finish quality level Q2–Q4 for plasterboard
- for multi-layer application – subsequent coats after 30 minutes
- full-surface filling: up to 5 mm
- filling with defect repair: up to 10 mm
EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM ATLAS
set of products for insulating external walls of buildings
GIPSAR UNI
white gypsum finishing coat
- reinforced with polymers
- optimum hardness
- perfect spreadability
- well coated with paints
- snow-white colour
GIPSAR PLUS
gypsum top finish
- reinforced with polymers
- maximum single coat thickness 3 mm
- for manual and spray application
- for manual and mechanical sanding
GIPSAR GO!
ready-to-use polymer finishing plaster
- quick and easy application
- perfect surface - without blisters or craters
- colour change - allows work progress to be controlled
- for all types of paint
- working comfort - easy sanding
- clean smoothing - reduced dusting
ATLAS ZW 330
rapid-set levelling mortar
- LEVELS→REPAIRS→FILLS
- for levelling walls and floors and for shaping slopes
- for quick repairs and filling of renders, screeds, walls
- high mechanical strength C25 F5
- tiles can be laid after 8 hours
- structural reinforcement with 3D fibres
- polymer enhanced formula
ATLAS PLASTERING MORTAR M
for mechanical plastering
- for mechanical application of traditional cement plaster in category 0-III
- high ductility
- increased adhesion to the substrate
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS PLASTERING MIX
traditional cement plaster, category III
- for plastering of walls made of ceramic, silicate brick, cellular concrete, concrete hollow blocks
- increased bonding
- plasticized, easy to apply
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS MASONRY MORTAR M10
traditional masonry mortar
- for ceramic, concrete and silicate elements
- high ductility
- compressive strength - min. 10.0 N/mm²
- combines elements into a stable, durable wall
ATLAS MASONRY MORTAR FOR CLINKER
contains trass
- does not cause salt efflorescence
- does not contaminate brick surfaces
- based on filtered aggregate
- for bricklaying and pointing
ATLAS MASONRY MORTAR
traditional masonry mortar
- for ceramic, concrete and silicate elements
- for joints 6-40 mm thick
- high plasticity
- compressive strength – category M5
- joins elements into stable, durable wall
ATLAS ELASTIFIED ADHESIVE MORTAR
general-use adhesive 2-10 mm
- for ceramic tiles, including mosaics and glaze
- for small and medium format tiles
- for kitchens, bathrooms, corridors, laundry rooms, garages
- allows tiles to be stuck from the top of the wall
- extended open time
ATLAS WODER SX
sealing mortar
- crystallisation technology
- for insulating foundations, basements and plinths
- self-sealing effect of the coating and structural sealing of the substrate
- resistant to positive and negative water pressure
- for the renovation of very damp structures
ATLAS WODER DUO
two-component waterproofing
- waterproofing beneath ceramic tiles
- fibres reinforced, bridges the cracks
- for swimming pools, balconies, terraces, bathrooms
- for insulation of foundations and basements from the inside
ATLAS UNI-GRUNT ULTRA
deeply-penetrating concentrate for absorbent substrates
- for flooring, adhesives, plasters, top finishes, paints, wallpapers
- colour enables to control the work progress
- significantly improves adhesion to the substrate
- decreases substrate absorptiveness
ATLAS UNI-GRUNT
deep penetrating primer
- maximum substrate reinforcement effect
- express
- reduces and evens out absorbency
- increases adhesion
- for indoor and outdoor use
- application with a brush, roller or sprayer
- for top finishes, paints, adhesives, plasters, floors and self-levelling screeds
ATLAS ULTRAGRUNT
quick drying primer for critical substrates
- under self-levelling compounds, tile adhesives
- on concrete, terrazzo, ceramic tiles, OSB
- increases adhesion - contains quartz aggregate
- further work after 4 hours
ATLAS ULTRA GEOFLEX WHITE
highly elastic deformable gel adhesive (2-15 mm)
- natural stone, marble, ceramic tiles, stoneware, mosaic, stone, glass
- bathroom, kitchen, balcony, terrace, swimming pool, façades
- perfect distribution and no run-off even with mega-formats > 5 m²
- the most difficult substrates, including: metal, OSB boards, composite panels, old ceramic tiles, floor heating, waterproofing
- two different mixing ratios – for a viscosity in accordance with the needs
- maximum tile size: unlimited
ATLAS ULTRA GEOFLEX
highly elastic deformable gel adhesive (2-15 mm)
- ceramic tiles, marble, mosaic, stone, glass
- bathroom, kitchen, balcony, terrace, swimming pool, façades
- perfect distribution and no run-off even with mega-formats > 5 m²
- the most difficult substrates, including: metal, OSB boards, composite panels, old ceramic tiles, floor heating, waterproofing
- two different mixing ratios – for a viscosity in accordance with the needs
- maximum tile size: unlimited
ATLAS SILICONE RENDER
thin – coat silicone render
- water vapour permeable
- low water absorptiveness
- very high resistance to soiling
- very good bonding to substrates
ATLAS SILICONE-SILICATE RENDER
thin – coat silicone-silicate render
- very high water vapour permeability
- low water absorptiveness
- resistant to soiling
- very good bonding to substrates
ATLAS ACRYLIC RENDER
thin – coat acrylic render
- low water absorptiveness
- resistant to soiling
- very good bonding to substrates
- easy texture forming
- improved resistance to mechanical damage
ATLAS SILICONE HYBRID RENDER
thin – coat acrylic - silicone render
- vapour permeable
- very low water absorptiveness
- highly resistant to dirt
- high adhesion to the substrate
ATLAS TRP
cement-lime base coat renovation plaster
- for very saline substrates
- base coat underneath renovation plaster
- for levelling of surface and for filling gaps
- efficiently accumulates salts
- contains trass
- for mechanical and manual application
ATLAS TRO
preparatory spray render
- high adhesion to the substrate
- improves bonding of renovation plasters
- for application also on saline walls
- for manual and mechanical application
ATLAS TR
cement-lime renovation render
- efficiently accumulates salts
- accelerates the drying out of masonry
- highly diffusive, hydrophobic, contains trass
- complies with instruction sheet 2-9-04
- for mechanical and manual application
ATLAS SEALING TAPES
sealing tape and corners
- for sealing edges and expansion joints
- highly flexible
- element of WODER waterproofing systems
ATLAS BUTYL TAPE
self-adhesive sealing tape
- self-adhesive
- for sealing expansion joints and wall corners
- very good adhesion to PVC and metal
- on balconies and terraces
- in bathrooms, kitchens
UNCOUPLING MAT ATLAS T 100
- allows ceramic cladding to be laid without the need for mapping of substrate expansion joints
- allows for an independent expansion joint system
- allows large-format tiles to be installed without moving the threshold expansion joints
- for laying ceramic tiles on contaminated substrates with reduced adhesion
- significantly speeds up the installation of new ceramic coverings in a single room when the substrate is made up of different types of flooring
- makes it possible to create a uniform ceramic floor on adjacent subfloors with strongly varying thermal loads (e.g. with and without underfloor heating, highly sunny floor sections)
ATLAS WODER E
fast drying liquid foil
- under any type of tiles
- for wet rooms and balconies
- bonding of tiles after only 2 hours for damp proofing
- bonding of tiles on floors after 4 hours
- consumption on the wall approx. 1 kg/m², consumption on the floor approx. 2.0 kg/m²
- highly flexible, with high adhesion
ATLAS SZOP 2000
concentrated polymer dispersion residues remover
- removes residues of priming emulsions, paints and dispersion renders
- for ceramic, stone, clinker, chrome plated, varnished, stainless steel and plastic surfaces
ATLAS SZOP
concentrated cement and lime residues remover
- for surfaces resistant to acids, ceramic, stone, chrome plated, varnished, stainless steel and plastic
- removes rust and water stains
- concentrate, can be diluted
ATLAS BACKER ROD
flexible filling of expansion joints
- flexible
- resistant to ageing
- non-absorbent
- easy to install
New
ATLAS STR+
fast-setting compound for jointing plasterboard
- for repairing holes and cracks and for corner finishing
- suitable for all rooms, including damp areas such as kitchens, bathrooms and garages
- very high resistance to softening
- board finish quality levels Q1-Q3
- for jointing without the use of tape (KPO and KPOS edges in accordance with PN-EN 520)
- high strength and hardness
- short setting time and rapid drying allow for shorter processing times and the application of subsequent layers
- can be mixed by hand or mechanically
ATLAS STOPTER K-50
white general use adhesive for external wall insulation
- no priming mass required
- for mineral wool and polystyrene (also for graphite polystyrene)
- for boards and for the reiforcement layer
- reinforced with microfibers
- very good application parameters
ATLAS STOPTER K-20
specialized adhesive mortar for thermal insulation and for mesh embedding
- recommended for application at low temperatures
- very high adhesion to substrates
- flexible, fibre-reinforced
- insulation of existing thermal insulation
- for insulation with ceramic tiles up to 4 m²
ATLAS ANTI-ADHESION AGENT
anti-adhesion agent for wood textured silicone molds
- easy and safe in use
- leaves no stains on the substrate
- makes work easier and prevents render from sticking to the mould
New
ATLAS SMS 60 ULTRA
cement-based self-levelling floor screed with the gel technology
- for levelling old substrates in a layer of 3 - 60 mm
- for making self-levelling floating screeds with a thickness of 30 – 60 mm
- it can be used for making of heating screeds from 25 mm above the heating system (below the standard thickness),
- as substrate for tiles, laminate flooring, fitted carpets, parquet floors and floorboards
- can be used as a final layer - floor
- foot traffic after only 2 hours
- ready for tiling after only 16 hours
- very smooth surface
ATLAS SMS 30
Rapid-set, self-levelling screed
- foot traffic just after 3 hours
- tiling just after 18 hours
- underneath tiles, panels, carpet, parquet
- low linear contraction
- for leveling heating screeds
ATLAS SMS 15
rapid-set, self-levelling compound
- pedestrian traffic after just 3 hours
- tiling just after 8 hours
- under tiles, panels, carpets, parquet, epoxy resin flooring
- low linear shrinkage
- for leveling heating screeds
ATLAS SMB BITUMINOUS MEMBRANE
self-adhesive bituminous membrane
- waterproofing of terraces, balconies, foundations, cellars, underground garages
- high adhesion to the substrate
- easy and quick installation
- SBS modified
New
ATLAS SILKON BA
concrete texture silicone render
- perfectly imitates exposed concrete
- freedom of colour and texture design
- highly UV- and water-resistant
- resistant to soiling
- can be applied in wet areas and on ceramic tiles
ATLAS SILKON ANX
priming mass for silicone and silicone-silicate renders
- ensures perfect bonding of renders
- reduces absorptiveness and strengthens substrates
- facilitates render application and texture forming
- unifies substrate colour
- water vapour permeable
ATLAS SANITARY SILICONE SILTON S
sanitary silicone (4-25 mm)
- for sealing various types of joints and connections
- flexible
- weather-resistant
ATLAS ELASTIC SANITARY SILICONE
sanitary silicone (4-25 mm)
- stain resistant, easy to keep clean
- for filling of expansion joints
- for filling of joints between various materials
- durable, elastic and tight filling
- available in 39 colours, compliant with colours of ATLAS grouts
ATLAS SAM 200
self-leveling screed
- anhydrite-gypsum based
- almost contractionless – no need of expansion joints for up to 50 m²
- adjustable applied mass consistency
- conducts heat well – perfect for floor heating
- self-leveling – facilitates application
ATLAS SAM 100
fast setting, self-leveling screed
- anhydrite-gypsum based
- high compressive strength ≥ 35.0 N/mm²
- resistant to concentrated load
- almost no contraction – no need of expansion joints for up to 50 m²
- under tiles, carpet flooring, parquet, panels
ATLAS SALTA S
façade silicate paint
- water repellent
- perfectly vapour-permeable
- ensures long-term durability and protection of the facade
- for painting fresh mineral renders
ATLAS SALTA N PLUS
silicone facade paint
- outstanding self-cleaning ability
- superhydrophobic and vapour-permeable
- UV and weather resistant
- does not discolour when exposed to moisture
- no primer required
ATLAS SALTA N
façade silicone paint
- for the renovation of old building facades
- façade self-cleaning ability
- low absorptiveness
- no primer required
ATLAS SALTA E
façade acrylic paint
- excellent coverage and efficiency
- rich colour palette
- self-cleaning
ATLAS SALTA
silicone facade paint
- outstanding colour durability
- well coating
- highly resistant to soiling
- no primer required
- low absorptiveness
ATLAS ROKER W
adhesive mortar for mineral wool boards fixing
- vapour-permeable
- high adhesion to difficult substrates
- recommended for façade systems and garage systems with high acoustic insulation
ATLAS ROKER U
general-purpose adhesive mortar for thermal insulation fixing and mesh embedding
- vapour-permeable
- fibre-reinforced
- increased resistance to cracks and scratches
- recommended for façade systems and garage systems with high acoustic insulation
ATLAS REKORD
white cement top finish
- based on white cement
- for finishing walls and ceilings
- on typical mineral substrates
- contains fine aggregate – up to 0.2 mm
- reinforced microfibers
ATLAS RAPID
ready-to-use polymer top finish
- ready-to-use
- maximum single coat thickness – 3 mm
- optimum hardness
- for machine and manual application
- snow-white
ATLAS proFARBA
white latex interior paint
- perfect coating
- highly resistant to scrubbing and washing
- with thixotropic effect
- for walls and ceilings
ATLAS POSTAR 80
fast setting cement floor (10-80 mm)
- fast drying - fixing the cladding after 3 hours
- fast setting - foot traffic after 3 hours
- excellent cohesion, under tiles, parquets and epoxy floors
- limited linear shrinkage
ATLAS POSTAR 60
rapid-set cement floor
- foot traffic after 6 hours
- ready for tiling after 24 hours
- for rooms with heavy loads, including traffic
- screed for parquet, tiles, panels
ATLAS POSTAR 20
fast drying cement screed
- foot traffic and tilling after just 12 hours
- tile adhering after just 24 hours
- under tiles, panels, epoxy coatings
- for making sloping layers on terraces and balconies
- perfect for underfloor heating
ATLAS POSTAR 10
traditional cement floor
- Foot traffic after 24 hours, tilling after 36 hours
- abrasion-resistant
- for garages, workshops, storage areas
- for areas exposed to permanent moisture
ATLAS PLUS S2 HYDRO
highly deformable adhesive C2TES2 with function of waterproofing
- 2 in 1 - S2 adhesive and waterproofing in one step
- for application with terrace profiles and sealing tapes
- for terraces, balconies, façades, bathrooms, linear drains, kitchens
- for critical substrates e.g. metal, OSB boards, tile on tile, floor heating, waterproofing coats
- application in one technological cycle
- cracks bridging up to 0.8 mm
ATLAS PLUS EXPRESS
fast-setting deformable adhesive S1 2-5 mm
- for claddings requiring very rapid work progress and virtually immediate use
- for all types of ceramic, stone, glass, composite panels and panelling
- for small, medium and large format tiles
- for difficult substrates: underfloor heating, OSB and plasterboard, old tiles, wooden ceilings, metal surfaces and plastics
- for terraces, balconies and facades, for swimming pools and process vessels
- for residential, commercial, public and industrial buildings
ATLAS PLUS WHITE
white highly flexible adhesive, deformable S1 2-10 mm
- recommended for marble and natural stone
- for all types of tiles, including ceramic, porcelain and glass tiles
- on difficult substrates, e.g.: old tiles, terrazzo, plas-terboard, OSB, waterproofing
- for facades, terraces, underfloor heating, for swimming pools
ATLAS PLUS
highly flexible, deformable adhesive 2-10 mm
- excellent bonding even at low temperatures
- ceramic tiles, porcelain-gres, mosaic, stone, glass tiles
- bathroom, kitchen, terrace, balcony, garage, stairs, swimming pool
- OSB, plasterboard, old tiles, waterproofing, terrazzo, floor heating
- 3 x greater initial bonding
ATLAS optiFARBA
white latex interior paint
- excellent coating
- washable
- snow white, matt
- highly efficient
- with thixotropic effect
ATLAS OK! – ELASTIFIED ADHESIVE
universal adhesive 2-10 mm
- dual fibre power
- ceramic tiles, porcelain stoneware, stone, mosaic
- bathroom, kitchen, living room, hallway
- grouting after just 12 hours
New
ATLAS NEXUS
hybrid gypsum-cement plaster
- high resistance to impact and scratches
- perfect surface, smooth and crack-free
- highest strength class (≥7 MPa)
- hardness 8 times higher than standard requirements (>20 MPa)
- also suitable for damp rooms, e.g. bathrooms, garages, basements
- ideal substrate for skim coats, wallpaper, paint and decorative finishes
- versatile – from the basement to the roof
- for full-surface plastering, filling gaps, filling grooves, and spot repairs to plasterwork, e.g. reveals after replacing window frames
- fast setting time
ATLAS MYKOS PLUS
concentrated agent for elimination of algae, fungi and lichen
- cleans façades, terraces and roofs
- protects against secondary biological corrosion
- safe for cleaned surfaces
ATLAS MONTER T-5
fast setting assembly mortar
- firmly fixed after 5 minutes
- for fixing steel and plastic parts
- 10 MPa strength after 1 hour
- for sealing point water leaks
ATLAS MMS 60
Hybrid, self-levelling floor screed
- as substrate for tiles, laminate flooring, wooden floorboards, carpet and PVC flooring
- for all rooms with underfloor heating, including "damp" rooms
- high thermal conductivity for improved heating system efficiency
- perfectly smooth surface, no sanding required
- IQ colour – the colour changes and makes it possible to check the progress of the work
ATLAS M-SYSTEM 3G
anchors for fixing boards to walls, ceilings and under roofs
- made of polypropylene or steel
- stable fixing of plasterboards to walls, ceilings and slopes
- easy-to-install point fixing
- quick progress of installation
- smooth adjustment of distance and inclination angle
- do not require substrate levelling or hacking off
- collision-free distribution of installations under plasterboard lining
ATLAS LIGHT CAULK
lightweight acrylic sealant
- immediate painting
- retains paint colours
- high adhesion
- no shrinkage, no cracking
- virtually no settlement
- white
ATLAS METALLIC VARNISH
metallic effect
- unique façade decorative effect
- resistant to atmospheric factors
- exceptional coat flexibility
- noble and modern façade appearance
ATLAS KS
dual-function liquid injection sealing
- forms secondary structural membrane
- eliminates capillary action in walls
- seals wall structure
- closes capillaries in crystallization process
- hydrophobizes capillaries
- reinforces mineral screeds and floors
ATLAS KB-15
masonry mortar for cellular concrete
- for walls made of cellular and aerated concrete
- for blocks, bricks, hollow blocks
- prevents thermal bridging
- compressive strength – category M5
ATLAS IMPREGNATING SEALER FOR NATURAL STONE AND GRES
- forms effective protective barrier against stains of wax, oil, wine, coffee
- does not affect appearance, colour and gloss
- guarantees long-term unchanged impregnated surface appearance
ATLAS HYDROBAND 3G
sealing tapes, corners and rings without perforation
- interior and exterior use
- 3 reliable layers
- resistant to frost, moisture and UV rays
ATLAS HOTER U2-B (white)
adhesive mortar for polystyrene boards fixing and for mesh embedding
- gel technology
- very high adhesion
- fibre-reinforced
- white, does not require priming mass beneath rendering coats
- can be used with dark intensive top coat colours of HBW > 15%
- for use in high temperature (up to 35°C)
ATLAS HOTER U
adhesive mortar for EPS and XPS and for mesh embedding
- high adhesion
- increased durability thanks to microfibres
- crack- and scratch-resistant
- for insulation with ceramic tiles up to 0.36 m²
ATLAS HOTER S
adhesive mortar for EPS and XPS
- increased grip
- rapid increase in strength
- good vapour-permeability
- for insulation with ceramic tiles up to 0.36 m²
ATLAS GTA
extra white polymer top finish
- perfectly white, perfectly smooth
- roller application - easy, even and rapid application without splashing
- ideal consistency for application and top coat shaping
- dust-free - clean and safe wet sanding
- for manual and mechanical sanding
ATLAS GRUNTO-PLAST
contact coat for difficult substrates
- increases adhesion and strengthens the substrate
- for terrazzo, varnishes, OSB boards and concrete
- ready to use
ATLAS NKP
strongly penetrating and strengthening the substrate primer
- colloidal formula
- adapts to any surface
- ready to use
- deeply penetrating
- streak-free
- does not make surfaces shiny
New
ATLAS GRAWIS ULTRA
adhesive compound for reinforced layers
- allows for the creation of facades in intense, dark or extremely dark colours
- ready to use
- no priming required – primer-free
- highly flexible, fibre-reinforced
- resistant to extreme thermal stresses and mechanical loads
- for facades with extremely varied colours, when combining different types of render finishes
- for facade sections exposed to mechanical damage
- for repairing damaged thermal insulation systems
ATLAS GRAWIS U
adhesive mortar for polystyrene and mesh embedding
- maximum adhesion after only 24 hours
- flexible - with 3D reinforcement
- also for mechanical application
- resistant to scratches and cracks
- fast increase in strength
- for white and graphite foamed polystyrene
ATLAS GRAWIS S
adhesive mortar for foamed polystyrene
- high adhesion to the substrate and foamed polystyrene after only 24 hours
- thermal insulation work can be restarted quickly - on the next day
- secure and stable fixing of boards
- for white and graphite foamed polystyrene
- foamed polystyrene thickness up to 50 cm
ATLAS GRAWIS P
graphite foam adhesive for thermal insulation
- for gluing white and graphite expanded polystyrene and other thermal insulation materials
- for filling gaps between thermal insulation materials
- for layer sealing installation of window and door frames
- high thermal insulation λ = 0.034 W/mK
- minimum level of expansion and post-expansion
- board adjustability time: 12 minutes
New
ATLAS GRAWIS DUO WHITE
white adhesive mortar for polystyrene, mineral wool and reinforced layers
- UNIVERSAL – for bonding boards and creating reinforced layers
- on white cement – reduces thermal stresses
- FLEXIBLE – has 3D reinforcement
- resistant to scratches and cracks
New
ATLAS GRAWIS DUO
adhesive mortar for polystyrene boards, mineral wool and reinforced layers
- UNIVERSAL – for white and graphite polystyrene and mineral wool
- maximum adhesion after just 24 hours*
- flexible – has 3D reinforcement
- resistant to scratches and cracks
New
ATLAS GO!
top finish ideal for roller
- convenient application with a roller, but also with an aggregate and a trowel
- easy application, also wet-on-wet
- smooth surface
- high adhesion to the substrate
- optimum hardness
- excellent workability - reduced dusting
ATLAS GEOFLEX EXPRESS
rapid-setting highly flexible gel adhesive 2-15 mm
- for quick work - foot traffic after only 2 hours
- grouting just after 2 hours
- installation of ceramic and stone tiles, porcelain stoneware, mosaics
- for use in communication routes, bathrooms, balconies and terraces
- perfect spread and no slip even with large tiles
- for critical substrates e.g. old tiles, terrazzo, plasterboards, damp- -proofing, floor heating, concrete and OSB
- wide range of mix water - consistency adjusted to the needs
- for filling, thin- and thick-coat bonding
- application in temperatures from +5°C up to +35°C
ATLAS GEOFLEX WHITE
highly flexible gel adhesive 2-15 mm
- ideal for ceramic, porcelain, glass mosaic, natural stone
- for tile on tile, OSB, terrace, balcony, underfloor heating
- bed depth up to 15 mm
- non-slip - even with large tiles
- excellent spread beneath a tile
ATLAS GEOFLEX
highly flexible gel adhesive 2-15 mm
- for ceramic and stone cladding
- zero or full flow under tile
- entry onto the cladding and grouting after just 12 hours
- for filling, thin- and thick-coat bonding
- on difficult substrates, including concrete, terrazzo, old tiles and OSB for terraces and balconies
- maximum tile size: 70x70
New
ATLAS GEMINI RSX
silicone render
- effortless application for a perfect finish
- rapid texturing saving time and effort on the job
- extreme weather resistance for exceptional protection against harsh atmospheric conditions, including hail
- self-cleaning effect prevents dirt from adhering to the façade
- No limit COLOR - for dark colours on a façade
- Elastomax TECHNOLOGY – exceptional elasticity
- superior durability and high resistance to mechanical impact, withstanding forces up to 140 joules
- crack prevention - the material effectively compensates for thermal stress on your façade, bridging and preventing micro-cracks from forming
New
ATLAS GEMINI RS
silicone render
- easy application
- simple and quick texturing
- ATLAS CAPS - long-term facade protection
- pigment protection system
- increased protection against dirt
- ATLAS 3D-flex - highly flexible, fibre-reinforced
ATLAS ELASTIC GROUT
fine-aggregate cement grout (1-7 mm)
- super smooth
- very easy application
- resistant to dirt
- universal - for all types of tiles and substrates
- bio resistant
ATLAS CERAMIC GROUT
fine-aggregate cement grouting mortar (1 - 20 mm)
- flexible, contains fibres
- stain-resistant, very easy to clean
- permanent colour fastness, no discolouration
- resistant to scrubbing and repeated washing
- perfect for kitchens, bathrooms, balconies and terraces
ATLAS LIQUID FOIL WODER W
liquid foil
- waterproofing under ceramic tiles
- for bathrooms, kitchens
- flexible, highly adhesive
- single-component
ATLAS FILER S
repair mortar for concrete, thickness 10-50 mm
- compressive strength 60 MPa
- possibility to apply another coat of ATLAS FILER S already after 4 hours
- application of the finishing repair putty ATLAS ENDER S already after 24 hours
ATLAS FASADA EPS BOARDS
polystyrene boards for ATLAS external thermal insulation systems
- standard and graphite
- perfect thermal conductivity coefficient λD – required partition
- thermal insulation can be achieved with thinner boards
ATLAS BASE COAT PAINT
white acrylic interior paint
- evens out the absorbency of the substrate
- improves adhesion and coverage
- provides breathable walls
- flexible - bridges micro cracks
New
ATLAS ESKIMO G
setting accelerator for thin-coat renders
- allows rendering at temperatures above 0 °C and increased humidity (even above 80%)
- two times faster setting of renders
- three times faster early resistance to precipitation
- neutral to other material properties
ATLAS EPO-S
universal epoxy binder
- Pedestrian traffic: after approx. 16 hours
- Compressive strength: minimum 50 MPa
- Flexular strength: minimum 15 MPa
- Adhesion to concrete: approx. 3 MPa
- Mechanical loading: after approx. 3 days
ATLAS ENDER S
finishing coat for concrete repairs, thickness 3-10 mm
- super smooth, for the final surface finish
- for levelling concrete and reinforced concrete surfaces
- for filling cavities and caves on prefabricated elements
ATLAS ELASTYK
highly flexible adhesive 2-10 mm (C2TE type)
- for ceramic tiles, including mosaic, glazed, stoneware and clinker tiles
- for stone tiles
- for underfloor heating, plasterboard, waterproofing and balconies etc.
- fixing tiles from the top of the wall
- high adhesion
ATLAS FLEXIBLE UNIVERSAL CAULK
flexible acrylic sealant
- excellent grip
- easy application and profiling
- painting after just 30 minutes
- increased resistance to shrinkage and cracking
- white
ATLAS ecoFARBA
white acrylic interior paint
- matt, snow-white
- high performance
- well coating
- for walls and ceilings
ATLAS DELFIN
impregnating agent for tiles and grouts
- protects tiles and joints against stains and dirt
- for unglazed and stone tiles
- creates a protective layer
- gives a fine shine to tiles
- enlivens the color of the surface
ATLAS DEKO M – type TM 5
decorative mosaic render – effect of natural stone
- highly resistant to mechanical damage
- excellent resistance to washing
- creates unique colour compositions
ATLAS DEKO M – type TM 3
standard decorative mosaic render
- highly resistant to mechanical damage
- excellent resistance to washing
- creates unique colour compositions
ATLAS DEKO M – type TM 1
fine aggregate decorative mosaic render
- highly resistant to mechanical damage
- excellent resistance to washing
- creates unique colour compositions
ATLAS DEKO M – type TM 0
standard decorative mosaic render
- highly resistant to mechanical damage
- excellent resistance to washing
- creates unique colour compositions
ATLAS CERPLAST
priming mass for renders
- ensures perfect bonding of renders
- reduces absorptiveness and strengthens substrates
- facilitates render application and texture forming
- unifies substrate colour
- available in several colours
- high performance and covering power
ATLAS CERMIT WN
mineral render imitating natural wood texture
- modern decorative effect
- durable and weatherproof
- highly vapour-permeable
- even texture using dolomite fillers
ATLAS CERMIT ND
thin-coat mineral render
- high durability of the lining during use
- polymer-reinforced
- highly vapour-permeable
- even texture using dolomite fillers
ATLAS CERMIT N-100
acrylic render for templates
- perfect for brick and stone effects
- very flexible
- impact-resistant
- improved resistance to mechanical damage
ATLAS BONDER+
adhesive for plasterboards
- very good adhesion to the substrate and to the plasterboard surface
- strong bonding of the plasterboard to the substrate
- fibre-reinforced – for high stability of the bonded boards
- suitable for bonding plaster blocks and plaster stucco
- high plasticity for easy application
ATLAS BEJCA
for wood imitation render ATLAS CERMIT WN
- high weather resistance
- high resistance to soiling
- rich colours palette of natural wood
- possibility of obtaining an aged wood effect
ATLAS ATUT
adhesive for tiles C1T (2-10 mm)
- for porcelain, glazed tiles and terracotta
- allows tiles to be applied "from the top down"
- layer thickness 2-10 mm
- for indoor and outdoor use
ATLAS ADHER S
contact coat for concrete repairs
- very high adhesion to concrete and steel
- bonding layer for ATLAS cement-based floor underlays
- high content of corrosion inhibitors
ATLAS 102
aluminium drip profiles for balconies and terraces
- innovative eave sealing system
- part of balcony and terrace insulation systems
- resistant to highly alkaline environments: mortars and insulating coatings
- resistant to UV radiation and mechanical damage
- easy and quick installation
Withdrawn
ATLAS 100
aluminum eaves profiles for balconies and terraces
- components of drainage systems
- weather-resistant
- resistant to mechanical damage
- easy and quick to install
DOLINA NIDY ZETA
machine-applied gypsum plaster
- increased strength and resistance to mechanical damage
- recommended for public buildings, staircases and corridors
- for indoor use
DOLINA NIDY SUPER LIGHT MACHINE-APPLIED PLASTER
cement-lime plaster for indoor use
- for mechanical and manual application
- yield of 12 kg/m²/cm
- grain size up to 0.5 mm
- super lightweight processing
- excellent plaster surface quality
DOLINA NIDY LIGHT MACHINE-APPLIED PLASTER FOR OUTDOOR USE
cement-lime plaster for outdoor use
- for mechanical and manual application
- performance of 14 kg/m²/cm
- grit size up to 1.0 mm
- light processing
DOLINA NIDY LIGHT MACHINE-APPLIED PLASTER FOR INDOOR USE
cement-lime plaster for indoor use
- for mechanical and manual application
- performance of 14 kg/m²/cm
- grit size up to 0.6 mm
- light processing
DOLINA NIDY THM
MACHINE-APPLIED HYBRID PLASTER
- combines the advantages of gypsum and cement plasters
- extremely strong surface
- resistant to microcracks
DOLINA NIDY OMEGA
for interior and exterior use
- for manual and mechanical application
- easy to process and finish
- very good grip
- optimum hardness
- effective paint coverage
DOLINA NIDY CEMENT BASE COAT
for indoor and outdoor use
- for mechanical and manual application
- increases adhesion to the substrate
- frost and waterproof
- reduces material costs for plastering work
DOLINA NIDY GYPSUM ADHESIVE T
- for fixing plasterboards
- excellent adhesion to the substrate
- optimally selected setting time
- high durability
DOLINA NIDY DELTA
filling gypsum for jointing without the use of tape
- for joint filling of plasterboard joints
- excellent for difficult substrates prone to cracking
- ideal for repairs to wall and ceiling surfaces indoors
- very good adhesion and mechanical strength
DOLINA NIDY SNOW-WHITE CERAMIC GYPSUM
- friendly bright color
- high strength
- wide range of applications
- natural origin
DOLINA NIDY BUILDING GYPSUM
- for production of mortars and prefabricated elements
- for construction and renovation work
- for indoor use
DOLINA NIDY GAMMA
manual gypsum plaster
- high performance
- optimal processing time at all stages of the work
- enables smooth surfaces
- layer thickness 8-30 mm
- for indoor use
DOLINA NIDY EURO-GRUNT 500
concentrate primer plus
- for priming absorbent and porous substrates
- very efficient
- strengthens and levels the absorbency of the substrate
- reduces material consumption
- for gypsum, cement and cement plasters.
- for self-leveling screeds
- for putties, coats, gypsum adhesives
DOLINA NIDY EURO-GRUNT 300
concentrate primer
- for priming absorbent and porous substrates
- very efficient
- strengthens and levels the absorbency of the substrate
- reduces material consumption
- for gypsum, cement and cement plasters.
- for self-leveling screeds
- for putties, coats, gypsum adhesives
DOLINA NIDY EKO-MAS
universal gypsum putty
- for making plaster
- ideal distribution on the ground
- very high efficiency and flexibility
- creates an excellent base for painting and wallpapering
- very good paint coverage
- snow-white
DOLINA NIDY BETA
light machine-applied gypsum plaster
- for making single-layer gypsum plasters
- increased performance and traction
- for indoor use
Withdrawn
DOLINA NIDY ALFA FIRE
fireproof machine-applied gypsum plaster
- reinforced concrete walls and ceilings (REI 15 ÷ 360)
- reinforced concrete beams and columns (RE 15÷240)
- steel beams and columns (RE 15÷180)
- composite elements made of concrete and profiled steel plate
DOLINA NIDY ALFA
machine gypsum plaster light plus
- for making single-layer machine plasters
- bright, strong, efficient, with increased grip
- for indoor use
PEARL ZEN
decorative structural paint
- structural effect and intensive colours
- decorative, single-coat paint
- 9 ready-to-use effects
- pearl shine
- durable coat finishing
LIME TRAVERTINE
structural lime interior plaster
- plaster based on natural binder and natural fillers
- resistant to bacteria and fungi
- assures water vapour permeability of walls
- effect of shallow or deep scores and gaps available depending on the grain size of the selected plaster.
CLASSIC STUCCO
semi-transparent structural interior plaster
- semi-transparent
- polished marble effect
- high gloss with optical spatial depth
PIGMENT CONCENTRATE
pigment paste for paints and plasters dyeing
- Compatible with Fox brand products
- 21 colours available; for emulsions dyeing
- easy dosing.
PIGMENT
pigment paste for paints and plasters dyeing
- Compatible with Fox brand products
- 21 colours available
- for emulsions dyeing; easy dosing.
SANDSTONE
structural interior plaster
- easy in use
- can be dyed
- allows for obturation of microcracks and substrate irregularities
HYDROPHOBIC VARNISH
impregnating sealer
- protects surfaces of walls and ceilings against humidity
- resistant to washing
- easy to use
- for protective and decorative purposes
DECORATIVE VARNISH
transparent, dispersive interior varnish
- colored or colorless
- resistant to washing
- easy to apply
- decorative, protective or shut-off function
KALAHARI
decorative structural paint
- effect of desert sand
- 5 ready-to-use colours
- well coating
- high yield
INITIUM
interior base coat paint
- levels differences in substrate texture and shade
- unifies absorptiveness
- improves bonding of subsequent coatings
INDUSTRIAL RUST EFFECT
decorative corroding plaster
- gets naturally rusty
- contains iron molecules
- resistant to repeated washing
- easy to aplly
BONDING PRIMER
dispersive agent for priming substrates beneath structural plasters and paints
- easy application with a brush or roller
- increases the adhesion of subsequent layers
- reduces absorbency
- contains aggregate
BLACKBOARD PAINT
special interior paint
- effect of school blackboard
- enables chalk writing on walls
- black
- great yield
RUST EFFECT
set of products for 10 m² of decoration
- easy in use
- well coating
- decorative
- imparts pearl shade to the coated surface
- facilitates cleaning.
BRUSHED ALUMINUM EFFECT
set of products for 10 m² of decoration
- brushed aluminum plate imitation
- easy to apply
- makes it easy to keep clean
DIAMENTO 3D
decorative structural paint
- effect imitates shimmering diamond flecks
- easy to apply with a brush
- 4 ready-made colours
- high yield
- resistant to washing
COLOR MATT
latex matt interior paint
- available in 224 colours
- hypo-allergenic
- deeply matt
- contains wax
- highly resistant to scrubbing
CONCRETE
modern, rough interior plaster
- modern, raw lime plaster for interiors
- natural product
- ecological plaster
RUST ACTIVATOR
activator for INDUSTRIAL RUST plaster
- to be used with INDUSTRIAL RUST plaster
- accelerates the process of corrosion
- easy in use
Withdrawn
ATLAS STONER
filling gypsum for tapeless jointing
- high strength and hardness
- excellent application even at high temperatures
- easy to process - manual and mechanical sanding
- for levelling substrates, repairing cavities and cracks, filling in fissures
- easy application - very good ductility
ATLAS SOLARIS
hand-applied gypsum plaster
- crack-resistant
- high performance
- single layer
- ensures a favourable microclimate
- optimum processing time (120 minutes)