Products
GIPSAR GO!
ready-to-use polymer finishing plaster
- quick and easy application
- perfect surface - without blisters or craters
- colour change - allows work progress to be controlled
- for all types of paint
- working comfort - easy sanding
- clean smoothing - reduced dusting
ATLAS ZW 330
rapid-set levelling mortar
- LEVELS→REPAIRS→FILLS
- for levelling walls and floors and for shaping slopes
- for quick repairs and filling of renders, screeds, walls
- high mechanical strength C25 F5
- tiles can be laid after 8 hours
- structural reinforcement with 3D fibres
- polymer enhanced formula
ATLAS PLASTERING MORTAR M
for mechanical plastering
- for mechanical application of traditional cement plaster in category 0-III
- high ductility
- increased adhesion to the substrate
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS PLASTERING MIX
traditional cement plaster, category III
- for plastering of walls made of ceramic, silicate brick, cellular concrete, concrete hollow blocks
- increased bonding
- plasticized, easy to apply
- layer thickness 6-30 mm
- plastering of walls and ceilings
ATLAS MASONRY MORTAR M10
traditional masonry mortar
- for ceramic, concrete and silicate elements
- high ductility
- compressive strength - min. 10.0 N/mm²
- combines elements into a stable, durable wall
ATLAS MASONRY MORTAR FOR CLINKER
contains trass
- does not cause salt efflorescence
- does not contaminate brick surfaces
- based on filtered aggregate
- for bricklaying and pointing
ATLAS MASONRY MORTAR
traditional masonry mortar
- for ceramic, concrete and silicate elements
- for joints 6-40 mm thick
- high plasticity
- compressive strength – category M5
- joins elements into stable, durable wall
ATLAS ELASTIFIED ADHESIVE MORTAR
general-use adhesive 2-10 mm
- for ceramic tiles, including mosaics and glaze
- for small and medium format tiles
- for kitchens, bathrooms, corridors, laundry rooms, garages
- allows tiles to be stuck from the top of the wall
- extended open time
ATLAS WODER SX
sealing mortar
- crystallisation technology
- for insulating foundations, basements and plinths
- self-sealing effect of the coating and structural sealing of the substrate
- resistant to positive and negative water pressure
- for the renovation of very damp structures
ATLAS WODER DUO
two-component waterproofing
- waterproofing beneath ceramic tiles
- fibres reinforced, bridges the cracks
- for swimming pools, balconies, terraces, bathrooms
- for insulation of foundations and basements from the inside
ATLAS UNI-GRUNT ULTRA
deeply-penetrating concentrate for absorbent substrates
- for flooring, adhesives, plasters, top finishes, paints, wallpapers
- colour enables to control the work progress
- significantly improves adhesion to the substrate
- decreases substrate absorptiveness
ATLAS UNI-GRUNT
deep penetrating primer
- maximum substrate reinforcement effect
- express
- reduces and evens out absorbency
- increases adhesion
- for indoor and outdoor use
- application with a brush, roller or sprayer
- for top finishes, paints, adhesives, plasters, floors and self-levelling screeds
ATLAS ULTRAGRUNT
quick drying primer for critical substrates
- under self-levelling compounds, tile adhesives
- on concrete, terrazzo, ceramic tiles, OSB
- increases adhesion - contains quartz aggregate
- further work after 4 hours
ATLAS ULTRA GEOFLEX WHITE
highly elastic deformable gel adhesive (2-15 mm)
- natural stone, marble, ceramic tiles, stoneware, mosaic, stone, glass
- bathroom, kitchen, balcony, terrace, swimming pool, façades
- perfect distribution and no run-off even with mega-formats > 5 m²
- the most difficult substrates, including: metal, OSB boards, composite panels, old ceramic tiles, floor heating, waterproofing
- two different mixing ratios – for a viscosity in accordance with the needs
- maximum tile size: unlimited
ATLAS ULTRA GEOFLEX
highly elastic deformable gel adhesive (2-15 mm)
- ceramic tiles, marble, mosaic, stone, glass
- bathroom, kitchen, balcony, terrace, swimming pool, façades
- perfect distribution and no run-off even with mega-formats > 5 m²
- the most difficult substrates, including: metal, OSB boards, composite panels, old ceramic tiles, floor heating, waterproofing
- two different mixing ratios – for a viscosity in accordance with the needs
- maximum tile size: unlimited