Products
ATLAS HOTER U
adhesive mortar for EPS and XPS and for mesh embedding
- high adhesion
- increased durability thanks to microfibres
- crack- and scratch-resistant
- for insulation with ceramic tiles up to 0.36 m²
ATLAS HOTER S
adhesive mortar for EPS and XPS
- increased grip
- rapid increase in strength
- good vapour-permeability
- for insulation with ceramic tiles up to 0.36 m²
ATLAS GTA
extra white polymer top finish
- perfectly white, perfectly smooth
- roller application - easy, even and rapid application without splashing
- ideal consistency for application and top coat shaping
- dust-free - clean and safe wet sanding
- for manual and mechanical sanding
ATLAS GRUNTO-PLAST
contact coat for difficult substrates
- increases adhesion and strengthens the substrate
- for terrazzo, varnishes, OSB boards and concrete
- ready to use
ATLAS NKP
strongly penetrating and strengthening the substrate primer
- colloidal formula
- adapts to any surface
- ready to use
- deeply penetrating
- streak-free
- does not make surfaces shiny
New
ATLAS GRAWIS ULTRA
adhesive compound for reinforced layers
- allows for the creation of facades in intense, dark or extremely dark colours
- ready to use
- no priming required – primer-free
- highly flexible, fibre-reinforced
- resistant to extreme thermal stresses and mechanical loads
- for facades with extremely varied colours, when combining different types of render finishes
- for facade sections exposed to mechanical damage
- for repairing damaged thermal insulation systems
ATLAS GRAWIS U
adhesive mortar for polystyrene and mesh embedding
- maximum adhesion after only 24 hours
- flexible - with 3D reinforcement
- also for mechanical application
- resistant to scratches and cracks
- fast increase in strength
- for white and graphite foamed polystyrene
ATLAS GRAWIS S
adhesive mortar for foamed polystyrene
- high adhesion to the substrate and foamed polystyrene after only 24 hours
- thermal insulation work can be restarted quickly - on the next day
- secure and stable fixing of boards
- for white and graphite foamed polystyrene
- foamed polystyrene thickness up to 50 cm
ATLAS GRAWIS P
graphite foam adhesive for thermal insulation
- for gluing white and graphite expanded polystyrene and other thermal insulation materials
- for filling gaps between thermal insulation materials
- for layer sealing installation of window and door frames
- high thermal insulation λ = 0.034 W/mK
- minimum level of expansion and post-expansion
- board adjustability time: 12 minutes
New
ATLAS GRAWIS DUO WHITE
white adhesive mortar for polystyrene, mineral wool and reinforced layers
- UNIVERSAL – for bonding boards and creating reinforced layers
- on white cement – reduces thermal stresses
- FLEXIBLE – has 3D reinforcement
- resistant to scratches and cracks
New
ATLAS GRAWIS DUO
adhesive mortar for polystyrene boards, mineral wool and reinforced layers
- UNIVERSAL – for white and graphite polystyrene and mineral wool
- maximum adhesion after just 24 hours*
- flexible – has 3D reinforcement
- resistant to scratches and cracks
New
ATLAS GO!
top finish ideal for roller
- convenient application with a roller, but also with an aggregate and a trowel
- easy application, also wet-on-wet
- smooth surface
- high adhesion to the substrate
- optimum hardness
- excellent workability - reduced dusting
ATLAS GEOFLEX EXPRESS
rapid-setting highly flexible gel adhesive 2-15 mm
- for quick work - foot traffic after only 2 hours
- grouting just after 2 hours
- installation of ceramic and stone tiles, porcelain stoneware, mosaics
- for use in communication routes, bathrooms, balconies and terraces
- perfect spread and no slip even with large tiles
- for critical substrates e.g. old tiles, terrazzo, plasterboards, damp- -proofing, floor heating, concrete and OSB
- wide range of mix water - consistency adjusted to the needs
- for filling, thin- and thick-coat bonding
- application in temperatures from +5°C up to +35°C
ATLAS GEOFLEX WHITE
highly flexible gel adhesive 2-15 mm
- ideal for ceramic, porcelain, glass mosaic, natural stone
- for tile on tile, OSB, terrace, balcony, underfloor heating
- bed depth up to 15 mm
- non-slip - even with large tiles
- excellent spread beneath a tile
ATLAS GEOFLEX
highly flexible gel adhesive 2-15 mm
- for ceramic and stone cladding
- zero or full flow under tile
- entry onto the cladding and grouting after just 12 hours
- for filling, thin- and thick-coat bonding
- on difficult substrates, including concrete, terrazzo, old tiles and OSB for terraces and balconies
- maximum tile size: 70x70