Helpline
ATLAS WODER W

ATLAS WODER W

elastic one-component damp proofing

ATLAS WODER W

Most important features

  • for bathroom, kitchen and cellar
  • highly flexible
  • protects substrates against moisture
  • excellent bonding

Product description

Protects substrates against moisture – plasters and screeds in wet rooms (bathrooms, baths, showers, kitchens, wash rooms), particularly in wet zones of these rooms - around shower cabins, wash basins, bathtubs, sinks, etc.

Forms light type damp proofing – proofs places with no pressurised water action (free flow).

Enables installation of flexible protection of corners and expansion joints – along with ATLAS SEALING TAPE and CORNERS or ATLAS HYDROBAND tapes and corners embedded, secures the edges of joints between walls and screeds as well as the expansion joints.

Proofs surfaces around walls and floors, around passages of water and sewage system pipes – together with FLOOR or WALL RINGS or ATLAS HYDROBAND wall rings embedded.

Main properties

  • Highly flexible – can be used on substrates with floor or wall heating systems and other surfaces subject to deformations.
  • Excellent bonding to typical construction substrates – minimum 2.2 MPa for concrete.
  • Coat damp proofing – forms a several millimeter thick coat, which has to be protected against mechanical damage, e.g. resulting from foot traffic – must be covered with screeds, plasters or cladding.
  • Resistant to substrate cracking - the maximum score width, where no coat cracking occurs is 2.5 mm.
  • Should only be mixed before use – a one-component membrane.
  • It can be used up gradually within 12 months– even if the bucket is opened and the material partially used, the remaining mass can be used up within the rest of the shelf life, i.e. 12 months since the date of manufacturing.
  • Comfortable use regardless the substrate type – it is easily applied onto plasterboards, OSB boards, cement or gypsum plasters, metal or PVC elements.
  • Easily controlled coat thickness – regardless the application tool - when using a brush, a roller or a steel trowel.
  • Excellent substrate coating, even with a single coat.
  • Allows easy visual assessment of thickness and uniformity of the applied coat – owing to intense colour and texture after drying

Main parameters

  • Min./max. coat thickness: 1 mm / 5 mm
  • Open time: min. 30 minutes
  • Drying time: approx. 60 minutes
  • Second coat application: after approx. 3 hours
Go top
ATLAS WODER W
ATLAS WODER W
elastic one-component damp proofing

Current documentation