EXTERNAL WALL INSULATION
ATLAS STOPTER K-100
adhesive mortar for making a reinforced layer
- resistant to thermal and mechanical load
- forms thermal insulation of impact resistance of 120 J
- obturates scratches
- reinforced with microfibres
- highly hydrophobic
- does not require priming prior to application of rendering coats
- for making new high impact resistant façades or renovating old façades
AVAL SILICONE HYBRID RENDER
thin – coat acrylic - silicone render
- vapour permeable
- very low water absorptiveness
- highly resistant to dirt
- high adhesion to the substrate
ATLAS GRAWIS S
adhesive mortar for foamed polystyrene
- high adhesion to the substrate and foamed polystyrene after only 24 hours
- thermal insulation work can be restarted quickly - on the next day
- secure and stable fixing of boards
- for white and graphite foamed polystyrene
- foamed polystyrene thickness up to 50 cm
ATLAS HOTER U
adhesive mortar for EPS, XPS and for base coat
- improved bonding
- good water vapour permeability
- rapid strength build-up
- on ceramic, concrete and silicate elements
ATLAS GRAWIS U
adhesive mortar for polystyrene and mesh embedding
- ▪ maximum adhesion after only 24 hours
▪ flexible - with 3D reinforcement
▪ also for mechanical application
▪ resistant to scratches and cracks
▪ fast increase in strength
- for white and graphite foamed polystyrene
ATLAS HOTER S
adhesive mortar for EPS and XPS
- improved bonding
- good water vapour permeability
- rapid strength build-up
- on ceramic, concrete and silicate elements
ATLAS STOPTER K-50
white general use adhesive for external wall insulation
- white
- no priming mass required
- for mineral wool and polystyrene
- for boards and base coat installation
- also for graphite polystyrene
ATLAS ROKER U
adhesive mortar for mineral wool and for base coat
- very high bonding to difficult substrates
- perfect workability
- water vapour permeability
- reinforced with fibres
- improved resistance to cracking and scores
ATLAS ROKER W
adhesive mortar for mineral wool boards fixing
- for mineral wool
- very high bonding to difficult substrates
- very good workability
- water vapour permeability
ATLAS HOTER U2
adhesive mortar for EPS and for base coat
- for use in high temperature (up to 35°C)
- very high bonding
- can be used with dark intensive render colours of HBW > 15%
- for insulation fixing and base coat application
ATLAS HOTER U2-B (white)
adhesive mortar for polystyrene boards fixing and for mesh embedding
- for use in high temperature (up to 35°C)
- white, does not require priming mass beneath rendering coats
- very high bonding
- reinforced with fibres
- can be used with dark intensive top coat colours of HBW > 15%
ATLAS STOPTER K-20
2 in 1 - adhesive mortar for polystyrene and XPS and for mesh embedding
- very good bonding
- reinforced with microfibres
- resistant to cracks and scratches
- can be used in low temperature (even from 0°C)
- also for graphite polystyrene
ATLAS SILICONE RENDER
thin – coat silicone render
- water vapour permeable
- low water absorptiveness
- very high resistance to soiling
- very good bonding to substrates
ATLAS SILICONE-SILICATE RENDER
thin – coat silicone-silicate render
- very high water vapour permeability
- low water absorptiveness
- resistant to soiling
- very good bonding to substrates
ATLAS ACRYLIC RENDER
thin – coat acrylic render
- low water absorptiveness
- resistant to soiling
- very good bonding to substrates
- easy texture forming
- improved resistance to mechanical damage