Helpline

adhesives for thermal insulation & base coat

ATLAS STOPTER K-100 ATLAS STOPTER K-100
adhesive mortar for making a reinforced layer
  • resistant to thermal and mechanical load
  • forms thermal insulation of impact resistance of 120 J
  • obturates scratches
  • reinforced with microfibres
  • highly hydrophobic
  • does not require priming prior to application of rendering coats
  • for making new high impact resistant façades or renovating old façades
ATLAS GRAWIS S ATLAS GRAWIS S
adhesive mortar for foamed polystyrene
  • high adhesion to the substrate and foamed polystyrene after only 24 hours
  • thermal insulation work can be restarted quickly - on the next day
  • secure and stable fixing of boards
  • for white and graphite foamed polystyrene
  • foamed polystyrene thickness up to 50 cm
ATLAS HOTER U ATLAS HOTER U
adhesive mortar for EPS, XPS and for base coat
  • improved bonding
  • good water vapour permeability
  • rapid strength build-up
  • on ceramic, concrete and silicate elements
ATLAS GRAWIS U ATLAS GRAWIS U
adhesive mortar for polystyrene and mesh embedding
  • maximum adhesion after only 24 hours
  • flexible - with 3D reinforcement
  • also for mechanical application
  • resistant to scratches and cracks
  • fast increase in strength
  • for white and graphite foamed polystyrene
ATLAS HOTER S ATLAS HOTER S
adhesive mortar for EPS and XPS
  • improved bonding
  • good water vapour permeability
  • rapid strength build-up
  • on ceramic, concrete and silicate elements
ATLAS STOPTER K-50 ATLAS STOPTER K-50
white general use adhesive for external wall insulation
  • white
  • no priming mass required
  • for mineral wool and polystyrene
  • for boards and base coat installation
  • also for graphite polystyrene
ATLAS ROKER U ATLAS ROKER U
adhesive mortar for mineral wool and for base coat
  • very high bonding to difficult substrates
  • perfect workability
  • water vapour permeability
  • reinforced with fibres
  • improved resistance to cracking and scores
ATLAS ROKER W ATLAS ROKER W
adhesive mortar for mineral wool boards fixing
  • for mineral wool
  • very high bonding to difficult substrates
  • very good workability
  • water vapour permeability
ATLAS HOTER U2 ATLAS HOTER U2
adhesive mortar for EPS and for base coat
  • for use in high temperature (up to 35°C)
  • very high bonding
  • can be used with dark intensive render colours of HBW > 15%
  • for insulation fixing and base coat application
ATLAS HOTER U2-B (white) ATLAS HOTER U2-B (white)
adhesive mortar for polystyrene boards fixing and for mesh embedding
  • for use in high temperature (up to 35°C)
  • white, does not require priming mass beneath rendering coats
  • very high bonding
  • reinforced with fibres
  • can be used with dark intensive top coat colours of HBW > 15%
ATLAS STOPTER K-20 ATLAS STOPTER K-20
2 in 1 - adhesive mortar for polystyrene and XPS and for mesh embedding
  • very good bonding
  • reinforced with microfibres
  • resistant to cracks and scratches
  • can be used in low temperature (even from 0°C)
  • also for graphite polystyrene