white highly flexible adhesive, deformable S1 2-10 mm


Most important features

  • recommended for marble and natural stone
  • for all types of tiles, including ceramic, porcelain and glass tiles
  • on difficult substrates, e.g.: old tiles, terrazzo, plas-terboard, OSB, waterproofing
  • for facades, terraces, underfloor heating, for swimming pools

Product description

ATLAS PLUS WHITE is a white C2TE S1 adhesive for tiles for interior and exterior use, on wall and floor.

The formulation of ATLAS PLUS WHITE adhesive uses polymer technology. Thanks to the high content of redispersible polymer resins, the cement adhesive obtains unique properties, making it a product with the highest technical and performance parame-ters, guaranteeing durability for many years. The presence of polymers ensures that high adhesion is achieved for any cladding to any substrate, including so-called difficult and critical sub-strates. Thanks to the interlacing of the polymer network with the network of inorganic hydration bonds of the cement, the adhesive achieves exceptional performance. The use of white cement limits the occurrence of discolouration of the cladding.

Main properties

    ATLAS PLUS WHITE is produced as a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents.

    It does not cause discolouration of the cladding - which makes it ideal for fixing glass mosaics and for bonding fused glass - due to its high adhesion and white cement.

    It is highly flexible - deformability S1 - the allowable deflection of the cured adhesive is between 2.5 and 5 mm (tested according to EN 12002).

    It has enhanced adhesion - the adhesion achieved to the concrete substrate under standard conditions is twice the adhe-sion required according to EN 12004.

    The adhesive layer thickness range (2-10 mm) allows:<br/> - thin-bedding of cladding on an even substrate,
    - thin-bedding of coverings on uneven substrates, preceded by levelling mudding.

    Extended open time - allows the adhesive to be applied to the tile for up to 30 minutes after it is applied to the substrate - can be applied to a larger area at a time and thus significantly re-duces working time.

    Reduced run-off - allows tiles to be fixed from above - the correct consistency and layer thickness eliminate adhesive run-off. This makes it possible to start work from the top of the wall and avoid fixing cut tiles on its exposed surface.

    Versatility of use - the adhesive is dedicated to practically all types of cladding, irrespective of the type and size of the tiles, on a variety of substrates, in different types of facilities, even with high operating loads on the cladding.

    Recommended for cladding in drinking water tanks, the food industry, healthcare facilities, nurseries, kindergartens, etc.

Technical data

Go top



Mixing ratio (water/dry mix)

0.26 – 0.28 l / 1 kg

Min. /max. adhesive thickness

2 mm / 10 mm

Pot life

approx. 4 hours

Open time

min. 30 minutes

Go top
white highly flexible adhesive, deformable S1 2-10 mm

Current documentation