Helpline
ATLAS SILMUR

ATLAS SILMUR

masonry mortars for silicate elements

ATLAS SILMUR

Most important features

  • four versions with different compressive strengths
  • available in white or grey
  • very good adhesion to masonry elements
  • good workability and ductility
  • SILMUR M-15 - also winter version (down to -10 °C)

Product description

ATLAS SILMUR is recommended for constructing walls of silicate elements (all versions), cellular and aerated concrete (SILMUR M-10, M-7.5 and M-5).

Available in four versions differing in compressive strength:
ATLAS SILMUR M-5 ≥ 5.0 N/mm²
ATLAS SILMUR M-7.5 ≥ 7.5 N/mm²
ATLAS SILMUR M-10 ≥ 10.0 N/mm²
ATLAS SILMUR M-15 ≥ 15.0 N/mm²
ATLAS SILMUR M-10 and M-15 are available to order only.

Used for thin joint masonry - recommended layer thickness from 2 to 10 mm (optimum thickness: 2-3 mm).

Possibility of using ATLAS SILMUR M-15 mortar in lowered temperatures - not less than 0 °C during the works and not less than -10 °C up to 8 hours after their completion. Attention: work-ing in lowered temperatures results in lowering of mortar strength parameters.

Type of masonry - silicate, cellular concrete and aerated con-crete, but also bricks, hollow blocks and other such ceramic and concrete materials.

Main properties

  • Used for bricklaying with thin joints – recommended joint thickness from 2 up to 10 mm (optimum thickness: 2-3 mm).
  • Used for surface floating and leveling - with recommended coat thickness 2-5 mm.
  • ATLAS SILMUR M-15 can be used in low temperature – not less than 0 °C during application and not less than -10 °C after 8 hours since the application.
  • Available in two colour versions – each ATLAS SILMUR version is available in white and grey colour.
  • Easy and convenient in use – characterised by very good workability, plasticity and excellent bonding.
  • High yield – the layer thickness can be monitored when applied with a notched trowel or a dispenser. It results in reduced mortar consumption and speeds up the work progress.