Products
New
ATLAS SILKON BA
concrete texture silicone render
- perfectly imitates exposed concrete
- freedom of colour and texture design
- highly UV- and water-resistant
- resistant to soiling
- can be applied in wet areas and on ceramic tiles
New
ATLAS ESKIMO G
setting accelerator for thin-coat renders
- allows rendering at temperatures above 0 °C and increased humidity (even above 80%)
- two times faster setting of renders
- three times faster early resistance to precipitation
- neutral to other material properties
ATLAS GRAWIS S
adhesive mortar for foamed polystyrene
- high adhesion to the substrate and foamed polystyrene after only 24 hours
- thermal insulation work can be restarted quickly - on the next day
- secure and stable fixing of boards
- for white and graphite foamed polystyrene
- foamed polystyrene thickness up to 50 cm
ATLAS HOTER U
adhesive mortar for EPS and XPS and for mesh embedding
- high adhesion
- increased durability thanks to microfibres
- crack- and scratch-resistant
- for insulation with ceramic tiles up to 0.36 m²
New
ATLAS GEMINI RS
silicone render
- easy application
- simple and quick texturing
- ATLAS CAPS - long-term facade protection
- pigment protection system
- increased protection against dirt
- ATLAS 3D-flex - highly flexible, fibre-reinforced
ATLAS GRAWIS U
adhesive mortar for polystyrene and mesh embedding
- maximum adhesion after only 24 hours
- flexible - with 3D reinforcement
- also for mechanical application
- resistant to scratches and cracks
- fast increase in strength
- for white and graphite foamed polystyrene
ATLAS HOTER S
adhesive mortar for EPS and XPS
- increased grip
- rapid increase in strength
- good vapour-permeability
- for insulation with ceramic tiles up to 0.36 m²
ATLAS STOPTER K-50
white general use adhesive for external wall insulation
- no priming mass required
- for mineral wool and polystyrene (also for graphite polystyrene)
- for boards and for the reiforcement layer
- reinforced with microfibers
- very good application parameters
ATLAS ROKER U
general-purpose adhesive mortar for thermal insulation fixing and mesh embedding
- vapour-permeable
- fibre-reinforced
- increased resistance to cracks and scratches
- recommended for façade systems and garage systems with high acoustic insulation
ATLAS ROKER W
adhesive mortar for mineral wool boards fixing
- vapour-permeable
- high adhesion to difficult substrates
- recommended for façade systems and garage systems with high acoustic insulation
ATLAS HOTER U2-B (white)
adhesive mortar for polystyrene boards fixing and for mesh embedding
- gel technology
- very high adhesion
- fibre-reinforced
- white, does not require priming mass beneath rendering coats
- can be used with dark intensive top coat colours of HBW > 15%
- for use in high temperature (up to 35°C)
ATLAS STOPTER K-20
specialized adhesive mortar for thermal insulation and for mesh embedding
- recommended for application at low temperatures
- very high adhesion to substrates
- flexible, fibre-reinforced
- insulation of existing thermal insulation
- for insulation with ceramic tiles up to 4 m²
ATLAS SILICONE RENDER
thin – coat silicone render
- water vapour permeable
- low water absorptiveness
- very high resistance to soiling
- very good bonding to substrates
ATLAS SILICONE-SILICATE RENDER
thin – coat silicone-silicate render
- very high water vapour permeability
- low water absorptiveness
- resistant to soiling
- very good bonding to substrates
ATLAS ACRYLIC RENDER
thin – coat acrylic render
- low water absorptiveness
- resistant to soiling
- very good bonding to substrates
- easy texture forming
- improved resistance to mechanical damage