Products
ATLAS SMS 30
Rapid-set, self-levelling screed
- foot traffic just after 3 hours
- tiling just after 18 hours
- underneath tiles, panels, carpet, parquet
- low linear contraction
- for leveling heating screeds
ATLAS SAM 100
fast setting, self-leveling screed
- anhydrite-gypsum based
- high compressive strength ≥ 35.0 N/mm²
- resistant to concentrated load
- almost no contraction – no need of expansion joints for up to 50 m²
- under tiles, carpet flooring, parquet, panels
ATLAS SAM 200
self-leveling screed
- anhydrite-gypsum based
- almost contractionless – no need of expansion joints for up to 50 m²
- adjustable applied mass consistency
- conducts heat well – perfect for floor heating
- self-leveling – facilitates application
ATLAS POSTAR 80
fast setting cement floor (10-80 mm)
- fast drying - fixing the cladding after 3 hours
- fast setting - foot traffic after 3 hours
- excellent cohesion, under tiles, parquets and epoxy floors
- limited linear shrinkage
ATLAS POSTAR 60
rapid-set cement floor
- foot traffic after 6 hours
- ready for tiling after 24 hours
- for rooms with heavy loads, including traffic
- screed for parquet, tiles, panels
ATLAS POSTAR 20
fast drying cement screed
- foot traffic and tilling after just 12 hours
- tile adhering after just 24 hours
- under tiles, panels, epoxy coatings
- for making sloping layers on terraces and balconies
- perfect for underfloor heating
ATLAS POSTAR 10
traditional cement floor
- Foot traffic after 24 hours, tilling after 36 hours
- abrasion-resistant
- for garages, workshops, storage areas
- for areas exposed to permanent moisture
New
ATLAS GO!
top finish ideal for roller
- convenient application with a roller, but also with an aggregate and a trowel
- easy application, also wet-on-wet
- smooth surface
- high adhesion to the substrate
- optimum hardness
- excellent workability - reduced dusting
New
ATLAS GO! Start & Finish
skim coat
- 2-in-1 – for simultaneous filling and levelling
- for levelling substrates, repairing defects and cracks, and fixing corners
- high strength and hardness
- high resistance to softening
- increased resistance to scratches and damage
- excellent workability and ease of application, no slump
- finish quality level Q2–Q4 for plasterboard
- for multi-layer application – subsequent coats after 30 minutes
- full-surface filling: up to 5 mm
- filling with defect repair: up to 10 mm
GIPSAR GO!
ready-to-use polymer finishing plaster
- quick and easy application
- perfect surface - without blisters or craters
- colour change - allows work progress to be controlled
- for all types of paint
- working comfort - easy sanding
- clean smoothing - reduced dusting
ATLAS BONDER+
adhesive for plasterboards
- very good adhesion to the substrate and to the plasterboard surface
- strong bonding of the plasterboard to the substrate
- fibre-reinforced – for high stability of the bonded boards
- suitable for bonding plaster blocks and plaster stucco
- high plasticity for easy application
New
ATLAS STR+
fast-setting compound for jointing plasterboard
- for repairing holes and cracks and for corner finishing
- suitable for all rooms, including damp areas such as kitchens, bathrooms and garages
- very high resistance to softening
- board finish quality levels Q1-Q3
- for jointing without the use of tape (KPO and KPOS edges in accordance with PN-EN 520)
- high strength and hardness
- short setting time and rapid drying allow for shorter processing times and the application of subsequent layers
- can be mixed by hand or mechanically
New
ATLAS NEXUS
hybrid gypsum-cement plaster
- high resistance to impact and scratches
- perfect surface, smooth and crack-free
- highest strength class (≥7 MPa)
- hardness 8 times higher than standard requirements (>20 MPa)
- also suitable for damp rooms, e.g. bathrooms, garages, basements
- ideal substrate for skim coats, wallpaper, paint and decora-tive finishes
- versatile – from the basement to the roof
- for full-surface plastering, filling gaps, filling grooves, and spot repairs to plasterwork, e.g. reveals after replacing win-dow frames
- fast setting time
ATLAS GTA
extra white polymer top finish
- perfectly white, perfectly smooth
- roller application - easy, even and rapid application without splashing
- ideal consistency for application and top coat shaping
- dust-free - clean and safe wet sanding
- for manual and mechanical sanding
ATLAS RAPID
ready-to-use polymer top finish
- ready-to-use
- maximum single coat thickness – 3 mm
- optimum hardness
- for machine and manual application
- snow-white